Motion Control – Push Type Solenoids
Motion Control – Van Nuys, CA – Solenoids – The S-70-300H Series of high force Push Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS).
Motion Control – Select from the S-70-300H Series of 3 Inch Dia. Push Type Solenoids to Meet the High Force Requirements of an Application!
January 13th, 2025 
Editor Motion Control – Kollmorgen Expands P8000 Series with P80360 Stepper Drive
January 6th, 2025 Editor Motion Control – Stepper Motor Drive!
Motion Control – High Torque Outputs and Flexible Installation Options for Heavy-duty Industrial Applications
Vaughan, Ontario, Canada – Motion Control -Kollmorgen has announced the launch of the P80360 stepper drive, the latest addition to its P8000 series. This new drive brings advanced functionality to the series, including closed-loop position control and full programmability, combining the precision of servo systems with the reliability and simplicity of stepper technology.
Motion Control – Electric Cylinder Has Zero Cogging and High Throughput!
December 31st, 2024 Editor Motion Control – Zero Cogging Electric Cylinder
Van Nuys, CA – Motion Control – Components -– Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators. This new DDLM-019-070-01 Linear Actuator can develop 10.1 oz (2.8 N) of continuous force and 32.1 oz (8.9 N) of peak force at 10% duty cycle. Having a stroke of 0.960 in. (24.4 mm), this clean, fully enclosed linear actuator, also referred to as an electric cylinder is ideal for use in critical medical applications.
Motion Control – Miniature Voice Coil Stage features 1 Micron Repeatability!
December 17th, 2024 Editor Motion Control – Miniature Voice Coil Stage!
Forestville, CA, — Motion Control – This VCS-10V Voice Coil Stage: 10mm of linear motion; Ball bearing guidance system; 1 micron position repeatability; 40 G’s acceleration; Non-contact electro-optic position sensor; Kinematic load mount; Direct SCA814 Servo Controlled Amplifier compatibility; 33 x 36 x 76mm, 230 grams
Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
December 10th, 2024 Editor All Motion Control – Multi-axis Motion Controllers
Van Nuys, CA – All Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
Motion Control – Select from a Series of Compact Electromagnets to Meet Holding Force and Duty Cycle Requirements of an Application!
November 26th, 2024 Editor Motion Control – Electromagnets
Motion Control – Van Nuys, CA – A powerful series of compact, low cost electromagnets has been released by Magnetic Sensor Systems (MSS). Their E-22-150 Series of Tubular Electromagnets 1.5 in. in diameter x 2.15 in. feature 19 different windings to select from based on the duty cycle and holding force requirements of the application.
Motion Control – Introducing the New VLM-60 Multi-turn Encoder from Netzer Precision
November 19th, 2024 Editor Motion Control – Multi-turn Encoder
Vaughan, Ontario, Canada — Motion Control – Netzer is proud to introduce the new VLM-60 multi-turn, hollow shaft absolute rotary encoder, the ideal solution for smooth and continuous production with limited space.
Motion Control – Half Inch Stroke, and High Force-to-Size Ratio, Are Features of Miniature Voice Coil Servo Motor!
November 12th, 2024 Editor Motion Control – Miniature Voice Coil Motor!
Motion Control – Van Nuys, CA – Newly released from Moticont, the miniature GVCM-019-022-02 Linear Voice Coil Servo Motor, is just three-fourths of an inch (19.0 mm) in diameter and features a half inch (12.7 mm) stroke. This very small linear actuator, also referred to as an electric cylinder, features 8.4 ounces (2.3 N) of continuous force and 26.6 ounces (7.4 N) of peak force at a 10 percent duty cycle. This non-commutated brushless servo motor features: High reliability, high speed, high acceleration/deceleration, and repeatability when used in a servo loop, and zero cogging.
Motion Control – Adhesive Dispensing Rotary Bearing Assembly
November 5th, 2024 Editor Motion Control Bearings – Custom Assembly
At LM76, we embrace challenges that push boundaries. While competitors stick to selling standard products, we thrive on designing and manufacturing unique, low-volume specials. Ready to take on the extraordinary?
Motion Control – Tutorial – Solenoid Construction
November 3rd, 2024 Editor Motion Control – Tutorial – Solenoid Construction
Solenoid Construction
A Solenoid is a long wire, wound with a helical pattern, usually surrounded by a steel frame, having a steel core inside the winding.
When carrying a current “i “, the Solenoid becomes an electro-mechanical device, in which electrical energy is converted into mechanical work.
Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!
October 29th, 2024 Editor Motion Control – 200 Nano Meters Repeatability Actuator!
Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexture guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams
Motion Control – Low Profile, High Precision Motorized Cross Roller Linear Stages
October 22nd, 2024 Editor Motion Control – Precision Linear Stage
Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in). Open loop repeatability of all stages is 0.5µ using a 10 mirco- steps-per-step Step Motor Driver or just 0.25µ using a 20 mirco-steps-per-step Step Motor Driver. Precision ground lead screws with just 2µ of backlash and high precision cross roller linear travel guides assures repeatability of 5µ, and positional accuracy of 10µ.
See the YouTube Video: https://youtu.be/qRsjeChhEWo
Motion Control – Rotary Solenoids Matched to An Application Are Available in OEM Quantities!
October 15th, 2024 Editor Motion Control Spotlights – Rotary Solenoids
Motion Control – Van Nuys, CA – The R-09-150 CWN Series of Clockwise, Reverse Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application.
Motion Control – More Advantages With Temposonics R-Series V Profinet
October 8th, 2024 Editor Motion Control – Magnetostrictive Linear Sensor
Vaughan, Ontario, Canada — Motion Control – Temposonics, the industry leader in magnetostrictive linear sensor technology, has announced a new generation of sensors focused on Industry 4.0, which features advanced machine monitoring and predictive maintenance capabilities to enhance industrial productivity.
Motion Control – Miniature Hollow Core Voice Coil Servo Motor is Only 1 Inch in Diameter, has a 0.375 Inch Stroke and High Force-to-Size Ratio!
October 1st, 2024 Editor Motion Control – Miniature Hollow Core Voice Coil Motor!
Van Nuys, CA – Motion Control – Moticont has released the HVCM-025-022-003-01 Hollow Core Voice Coil Motor, featuring an open aperture and high force-to-size ratio. This miniature Linear DC Servo Motor has a continuous force rating of 16.9 oz. (4.7 N) and a peak force of 53.5 oz (14.9 N) at a 10% duty cycle.
The extended length of the motor is 1.31 inch (33.3 mm) at mid-stroke, and has a 0.125 inch (3.2 mm) diameter open aperture for optics, illumination, laser beams, or passage of cables. Clean and quiet, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash (when connected directly to a load), high acceleration, deceleration and high speed.
Motion Control – Hybrid Linear Bearings for the Times Bearing Failure Just Can Not be Allowed to Happen!
September 24th, 2024 Editor Motion Control – Ceramic Hybrid Linear Bearings
E. Longmeadow, MA – Motion Control – Linear Motion – Pegasus Hybrid Linear Bearings for the times Bearing Failure just can not be allowed to Happen! That is the the time when Down-Time is more costly then the price of the bearings.
Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!
September 17th, 2024 Editor Motion Control – Miniature Autocollimator
Forestville, CA, — The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.
The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.
Motion Control – NEW! A Series of 600 mm to 1000 mm High Precision Ball Bearing Linear Guide Stages Available from OES!
September 10th, 2024 Editor Motion Control – Long Travel Linear Stages
Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. These high precision stages can be ordered with a Two-Phase Stepper Motor (pictured) which feature resolutions of 2 micron and 1.25 micron (achieved with a 10 or 20 micro-steps per step stepper motor driver), and up to 80 mm per sec of travel.
Motion Control – The S-63-38 Series of 0.38 Inch Dia. Pull Type Solenoids Features 16 Standard models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!
September 3rd, 2024 Editor Motion Control Technology Newsletter – Tubular Solenoids
Motion Control Technology – Van Nuys, CA – The S-63-38 Series of Pull Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). This series of 0.38 in. diameter solenoids features 16 standard off-the-shelf solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.
These miniature solenoids featuring a 0.38 in. diameter have a 0.66 in. long housing and when retracted are just 0.80 in. long.
Motion Control – Kollmorgen expands AKD2G versatility with the launch of new synchronized communication protocols
August 27th, 2024 Editor Innovations in Motion Control – Kollmorgen Servo Drives
Vaughan, Ontario, Canada — Innovations in Motion Control – Kollmorgen, a global leader in motion control systems, today announced the latest update to its AKD2G servo drive. With the introduction of these new features, Kollmorgen has broadened its offerings to additionally support PROFINET IRT and Ethernet/IP with CIP Sync alongside CANopen®*, EtherCAT®*, and FSoE time-synchronized communication protocols. Each protocol is rigorously tested with a variety of motion controllers and certified by industry standards organizations.
The AKD2G servo drive update allows for synchronized motion between multiple drives using a wide variety of control architectures. Thanks to its flexibility and high performance, AKD2G is the ideal drive for use in applications that require highly precise coordination across multiple axes of motion.
The drive features industry-leading power density in a compact package and is easy to mount — with one- and two-axis variants available. Engineers can leverage single-cable Smart Feedback Device (SFD) or HIPERFACE®* DSL connections, or choose from a wide range of other feedback devices.
Finally, the drive features an optional SafeMotion®™ Monitor (SMM) firmware with a safety level of SIL3/PLe to meet functional safety needs and enable a wider range of applications.
The AKD2G paired with AKM2G motors is part of the 2G Motion System, a suite of motion products designed to work together for ultimate ease of setup and higher performance.
Engineers also can take advantage of the drive’s compatibility with a wider range of controllers and feedback devices — or with other motors, as needed.
For more information, visit https://www.electromate.com/akd2g-series-servo-drive/
About Electromate:
Electromate specializes in robotic, mechatronic, and motion control solutions. We focus on high-performance and precision applications for the industrial automation sector.
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology.
They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-time delivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
For more information on the “Innovation and Technology Award”
For more information on the “2021 Excellence Award”
For more information on the 2024 “Best Place to Work” CLICK HERE!
For more information on the “AHTD Award” CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControl-XYZ-Theta.com
http://LinearMotionBlogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
