Archive for the ‘Innovations in Motion Control Technology – Mechanical’ Category

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage Forestville, CA, —motion control  — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 […]

Motion Control – NEW! A Series of 600 mm to 1000 mm High Precision Ball Bearing Linear Guide Stages Available from OES!

Motion Control – Long Travel Linear Stages Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 mm, 700 mm, […]

Motion Control – Hollow Core Linear Voice Coil Servo Motor Features 19.1 mm Stroke, High Force-to-Size Ratio!

Motion Control – Miniature Voice Coil Motor Van Nuys, CA – Motion Control – The HVCM-051-032-013-01 Linear Voice Coil Motor released by Moticont, features a high force-to-size ratio and a 19.1 mm (0.75 in.) stroke. A low inertia, high acceleration/deceleration, high speed, clean and quiet, non-commutated, hollow core brushless servo motor, the HVCM-051-032-013-01 Linear Voice […]

Motion Control – Deep Groove Stainless/Ceramic Hybrid Si3N4 Silicon Nitride Radial Ball Bearings for High Loads Are FDA/USDA/3A-Dairy Compliant!

Motion Control – Hybrid Si3N4 Silicon Nitride Radial Ball Bearings     E. Longmeadow, MA – Motion Control – XYZ and Theta – Deep Groove Hybrid Radial Ball Bearings featuring Si3N4 Silicon Nitride Ceramic balls from LM76 complement their broad range of linear bearings that are FDA/USDA/3A Dairy compliant. These Deep Groove Stainless/Ceramic Hybrid Si3N4 […]

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

Motion Control – Stage Features 200 Nanometers Repeatability! Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier […]

Motion Control – Three-Axis Yaw, Pitch, and Roll Positioning Stages Feature Four Motor Options!

Motion Control – Yaw Pitch and Roll Stage Van Nuys, CA – Motion Control – New compact three-axis, Yaw, Pitch, and Roll Stages from OES (Optimal Engineering Systems, Inc.) feature four motor options to meet the precision and speed of travel requirements of an application. The YPR-10-15-60 Series of Three-axis Yaw, Pitch, and Roll Stages […]

Motion Control Application – How Would You Position Components Of An Experimental Reactor Vessel Weighing 33 Tons?

Motion Control – Linear Motion Application Motion Control Application – Positioning a 33 ton Reactor vessel is Easy …   … Using Custom made LM76 Jet Rail Bearings and Shafting!

Motion Control – Linear Focus Actuator Features, 20 mm Clear Optical Path, <50 nanometer Repeatability, and <3 miliseconds Response Time!

Motion Control – Linear Focus Actuator Forestville, CA –The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

XYZ-G Positioning Stage- Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!

Motion Control – XYZ-Goniometer Positioning Stages Motion Control – Van Nuys, CA – XYZ-G Positioning Stage –  – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages.  Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with […]

Motion Control Components – Miniature Voice Coil Motor Features High Force to Size Ratio!

Motion Control – Miniature Voice Coil Motor Van Nuys, CA – Motion Control Components – The miniature Linear Voice Coil Motor, LVCM-022-013-01, from Moticont features a high force-to-weight ratio of 14.5 oz. (4.0 N) continuous force and 45.7 oz. (12.7 N) peak force in a compact 0.875 in. (22.2 mm) diameter x 0.50 in. (12.7 […]

Motion Control – CERAMICSPEED Radial Hybrid Bearings Prevents Arcing!

Motion Control – Hybrid Radial Bearings E. Longmeadow, MA – — Motion Control – CeramicSpeed Insulated ball bearings are custom made for electrical motors and your guarantee against damage caused by stray currents.

Motion Control – SPS15 Power Supply from Equipment Solutions for Voice Coil Actuators!

Motion Control – Voice Coil Motor Power Supply! Forestville, CA, – — The motion control SPS15 power supply will power any Equipment Solutions Linear Focus Actuator. With its universal instrumentation cord power entry module you will be able to run power from literally anywhere in the world anywhere.

Motion Control – Video – 3-axis High Precision XZG Motorized Stages from Optimal Engineering Systems!

Motion Control – Video – XZG-axis Motorized Stages Motion Control Stages – XZG-axis Stages To View the Motion Control Video Click “HERE” Motion Control – Video – An extensive series of XZG Motion Control Motorized Positioning Stages (X-axis, Z-axis, and Goniometer-axis) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high […]

Motion Control – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!

Motion Control – Electric Cylinder Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.

Motion Control – Select XTREME 6000, Full Ceramic Radial Bearings from CERAMICSPEED for Extreme Environment Applications!

Motion Control – Full Ceramic Ball Radial Bearings Motion Control – The XTREME 6000 ZrO2 Series of Full Ceramic Radial Bearings from CeramicSpeed are designed to provide levels of performance in extreme environments beyond the capabilities of steel and even hybrid bearings. The complementing components of these bearings were carefully selected to provide the highest […]

Motion Control High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control – Linear Focus Actuator Forestville, CA, – — The motion control LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.

Motorized Stages – Motion Control Dual-axis Yaw Pitch Stages for the Critical Measurement of Curves and Angles Featuring a 136 mm Radius of Rotation!

Motorized Stages – Motion Control Dual-axis Yaw Pitch Stages Motorized Stages – Motion Control – OES (Optimal Engineering Systems, Inc.) has released the new YP200-30 Series of Dual-axis, Yaw-Pitch Stages. This series of Yaw-Pitch Stages features a high precision rotary stage (Yaw-axis) capable of clockwise and counterclockwise rotation and a high precision goniometer with +/- […]

Motion Control – New Harmonic Drive HPF Series: High-Performance Hollow Shaft Gear Unit

Innovations in Motion Control Products – HPF Harmonic Drive Series

Motion Control Stage- Compact, Open Aperture Voice Coil Stages Features 1 Micron and 30 Micron Positioning Resolutions!

Linear Motion Stages Linear Motion Stages – Van Nuys, CA – The compact open aperture HCDS-051-032-013-01-B1-30 and the HCDS-051-032-013-01-B1-01 Voice Coil Stages from Moticont have a foot print of just 2.000 in. (50.8 mm) wide by 5.000 in (127.0 mm) long and feature positioning resolutions of 30 microns and just 1 micron respectively.

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks with Si3N4 Silicon Nitride Hybrid Bearings, Set New Standard for Performance and Hygienics!

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks E. Longmeadow, MA – Motion Control – FDA/USDA Certified, two, three and four post, Stand-Off Bearing Flange Blocks are setting a new standard for performance and Hygienics. These new Stand-off bearing flange blocks now available from LM76 reduce the surface area where mold and bacteria can […]

Powered by WordPress and ThemeMag