Motion Control – Latching Solenoids

Motion Control – Van Nuys, CA –A Series of Latching Pull-type Motion Control Solenoids released by Magnetic Sensor Systems (MSS) are low cost, economical to use, and easy to integrate into an application. The compact S-18-100T Pull-type Latching Solenoids are: 1.00 in. wide x 0.84 in. high x 1.73 in. long with 0.313 in diameter plunger.

The plunger has a stroke of up to 0.75 in. and has a 0.30 in. deep clevis and cross drilled 0.096 in. diameter hole for a 3/32 roll pin. Two 8-32 (or optional M4) threaded mounting holes are located on the underside of the solenoid for easy integration into new and existing applications.

These motion control solenoids may be energized by a short pulse of voltage. Once the plunger is seated, no further power is required to keep it in place as the internal permanent magnets will provide a latching force for the plunger. The latching action can be released by a short pulse of voltage in the opposite polarity.

The required holding force of an application will dictate the selection of the type of plunger (flat or conical face), and pull force required will dictate the AWG number and ampere turns. The nominal latched holding force is 5 lb. with a flat face plunger and 2 lb. with a conical face plunger. Conical face plunger produces a higher pull force at a long stroke while its holding force is less, compared to a flat face plunger.

The plunger can be supplied with optional integral E-ring and spring to help move the plunger back once the latching action is released.

Typical applications include: Valve control, office equipment, switch activation, clamping, positioning, games and toys, vending machines, and door locks.

About Magnetic Sensor Systems – Established in 1983, Magnetic Sensor Systems (MSS) designs and manufactures high quality motion control solenoids, electromagnets, driving electronics and other types of electro-mechanical components for a variety of industries and applications.

Part of Magnetic Sensor Systems’ competitive advantage is its state-of the-art in-house manufacturing facility in North America.  Highly controlled processes, committed staff and extensive testing complement their product design strengths.   This enables Magnetic Sensor Systems to supply the most demanding clients from specialized small orders to high volume just-in-time deliveries.  Magnetic Sensor Systems is an ISO 90001:2015 certified company.

Through wise and aggressive use of their resources and technology, MSS has become recognized as one of the world’s leading solenoid manufactures with a global customer base.

An extensive line of standard products are ready to be shipped immediately from stock, however, when required, their highly trained design engineers, are always available to work with a customer’s design staff to augment or develop a custom product to fit the specific needs of the customer.

For additional information contact the Sales Team at Magnetic Sensor Systems, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-9444, Tel: +1 (818) 785-6244, E-Mail info@magneticensorsystems.com or visit the website at http://www.magneticsensor systems.com

See this and other Motion Control Components from Magnetic Sensor Systems featured on:

http://MotionShop.com

http://MotionControl-XYZ-Theta.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com