Motion Control – The #1 Choice for X-axis Linear Motion CNC Plasma Cutter Tables
November 17th, 2025 
Editor Motion Control – Roller Blocks
Motion Control – Miniature PVS 30.5 Parallelogram Voice Coil Stage from Equipment Solutions!
November 10th, 2025 Editor Motion Control – Miniature Parallelogram Voice Coil Stage!
Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexture guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.
Motorized Stages – Motion Control Multi-axis Lift, Pan, and Tilt Motorized Stage Features +/- 5 Micron Repeatability!
November 3rd, 2025 Editor Motorized Stages – Motion Control Multi-axis Lift, Pan, and Tilt Stage
Motorized Stages – Van Nuys, CA – Motion Control – The new LPT60-60-60 Series of Lift, Pan, and Tilt Motorized Motion Control Stages has been released by OES (Optimal Engineering Systems, Inc.). These compact stages feature a Lift-axis with 60 mm (2.362 in.) of vertical travel, a horizontally mounted Pan-axis (rotary) stage, and vertically mounted Tilt-axis (rotary) stage.
Motion Control Solenoids – Open Frame Series of 18 Pull Type Solenoids with a 1 Inch Stroke Can Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications!
October 27th, 2025 Editor Motion Control Solenoids – Open Frame
Motion Control Solenoids – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user. MSS Solenoid coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles.
Motion Control – Compact 0.750 Inch Diameter Voice Coil Motor Features A 1.500 Inch Stroke and High Force-to-Size Ratio!
October 13th, 2025 Editor Linear Motion Actuator – 1.0 Inch Diameter Voice Coil Motors!
Van Nuys, CA – Motion Control – Moticont has added a 0.750 in. (19.1 mm) diameter (smaller than a US Quarter) Linear Voice Coil Motor, to their expanding line of voice coil or moving coil motors.
The LVCM-019-048-02 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed position loop. Voice Coil Motors (also referred to as actuators) are clean, quiet, efficient, brushless high speed linear servo motors. This small LVCM-019-048-02 diameter actuator has a 1.500 in (38.1 mm) stroke length and a high-force-to-size ratio of 7.4 oz (2.1 N) and a peak force of 23.5 oz. (6.5 N) at 10% duty cycle.
Motion Control – LM76 Designs and Manufactures Custom Linear Bearing for Space Technology Company!
October 6th, 2025 Editor Motion Control – Custom Bearing for Space Technology Company
Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions
September 29th, 2025 Editor Motion Control – Miniature Rotational Voice Coil Stage
Forestville, CA, – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.
Motion Control – A New Series of Pitch, Roll, and Yaw Positioning Stages Feature High Resolution and Repeatability!
September 22nd, 2025 Editor Motion Control – Pitch, Roll, and Yaw Stages
Motion Control – Van Nuys, CA – The new YPR-45-45-100 Series of Pitch, Roll, and Yaw Three-axis Stages are the integration of two +/- 45 degrees Goniometers for lower (pitch) and middle (roll) axes, and a large upper, 100 mm diameter, Rotary Stage (yaw axis). The integration of goniometers and rotary stage enables the identifying of crystals, estimating hyperspectral bidirectional reflectance, measurements of radiation patterns of LEDs, manufacturing of quartz oscillator plates using quartz cutting X-rays, examining cutting edges of medical instruments, gloss measurements, laser machining and drilling, aligning mirrors, tracking and scanning.
Motion Control – Select the Low Cost, Economical, Bi-Directional Latching Solenoid Best Suited for an Application!
September 15th, 2025 Editor Motion Control – Latching Solenoids
Motion Control – Van Nuys, CA –Latching Bi-Directional Solenoids released by Magnetic Sensor Systems (MSS) are low cost, economical to use, and easy to integrate into an application. The S-18-100LC2 and S-18-100LF2 Latching Bi-Directional Solenoids feature the same compact dimensions: 1.00 in. wide x 0.84 in. high x 1.73 in. long with 6-32 threaded Push/Pull plungers.
Motion Control – Kollmorgen expands AKD2G versatility with the launch of new synchronized communication protocols
September 8th, 2025 Editor Motion Control – Kollmorgen Servo Drives
Motion Control – Vaughan, Ontario, Canada – Kollmorgen, a global leader in motion control systems, today announced the latest update to its AKD2G servo drive. With the introduction of these new features, Kollmorgen has broadened its offerings to additionally support PROFINET IRT and Ethernet/IP with CIP Sync alongside CANopen®*, EtherCAT®*, and FSoE time-synchronized communication protocols. Each protocol is rigorously tested with a variety of motion controllers and certified by industry standards organizations.
Motion Control – Miniature Hollow Core Voice Coil Servo Motor Is Only 0.625 in. in Diameter!
September 1st, 2025 Editor Motion Control – Miniature Linear Voice Coil Motor
Van Nuys, CA – Motion Control – The HVCM-016-013-003-01 Hollow Core Voice Coil Motor, features an open aperture and high force-to-size ratio. This miniature Linear DC Servo Motor from Moticont has a continuous force rating of 5.7 oz. (1.6 N) and a peak force of 17.9 oz (5.0 N) at a 10% duty cycle.
Motion Control – Sleeve Style Linear Bearings and Precision Linear Shafting
August 25th, 2025 Editor Motion Control – Shafting and Bearings
Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!
August 11th, 2025 Editor Motion Control – ZGG Stage – Lift Plus Dual Goniometers
Van Nuys, CA – Motion Control – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact motion control stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.
See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA
Motion Control – High Force-to-Size Solenoid Series Features 18 different AWG Windings to Meet Force, Stroke Length, Voltage, and Duty Cycle Requirements of an Application!
August 4th, 2025 Editor Motion Control – Pull Type Tubular Solenoids
Motion Control – Van Nuys, CA – A series of 1.250 in. diameter tubular solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 1.00 inch, the S-20-125 series of Pull Type Tubular Solenoids feature 18 different solenoids with 23 AWG to 40 AWG (American Wire Gauge) windings. This broad range of solenoids allows the user to select the best solenoid for an application based on the force, stroke length, voltage, and duty cycle requirements. If needed, MSS solenoids with higher temperature class coil and lead wire insulation can be specified.
Motion Control – Maxon Adds Dynamism to Robotic Servo Motors
July 28th, 2025 Editor Motion Control – Motors and Gearheads
Advanced Compact Motors and Gearheads for High-Performance Robotics
Vaughan, Ontario, Canada -Electromate, Canada’s premier distributor of motion control solutions, is proud to announce the release of maxon’s EC Frameless DT50 Motor and ECX Flat Series DC Motors and Gearheads, designed to meet the demands of modern robotics and automation systems. The EC and ECX Series motors and gearheads offer compact, efficient drive systems with exceptional torque and power density, making them ideal for applications requiring precise motion control.
Motion Control – Miniature Voice Coil Motor Only 19.1 mm in Diameter Has 22.2 mm Stroke and High Force-to-Size Ratio!
July 21st, 2025 Editor Motion Control – Miniature Voice Coil Motor!
Van Nuys, CA – Motion Control – The miniature hollow core HVCM-019-032-003-02 Voice Coil Motor, featuring a 3.2 mm open aperture and high force-to-size ratio has been introduced by Moticont.
Motion Control – Linear Bearings Application – The Bearing that’s Present for Every Launch!
July 14th, 2025 Editor Motion Control – Linear Bearings Application
E. Longmeadow, MA – Motion Control – Linear Motion – LM76 Minuteman PTFE, Self-Lubricating motion control bearings take on some very stringent application roles, this is just one of them.
Motion Control – The 30 MM Vertical Lift Stage Features 0.2 Sub-micron Resolution, Very High Parallelism!
July 7th, 2025 Editor Motion Control – Precision Lift Stages
Motion Control Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) has released the AT20-30 series of Motorized Vertical Lift Stages featuring sub-micron resolution, very high parallelism and a vertical lift of 30 mm.
Motion Control – Ultra-High Precision, Compact, Low Cost, Optical Positioning System Features Zero Translation from Equipment Solutions!
June 30th, 2025 Editor Motion Control – Linear Focus Actuator
Sunnyvale, CA, — Motion Control – Optical Positioning System – Developed for precision optical positioning applications the LFA-1210 Linear Focus Actuator features a patented zero-translation tangential flexure for high speed travel. The clear aperture, 10 mm (0.394 in.) stroke length and standard 12 mm optics mount (or an optional DIN mount for use on microscopes) make this linear focus actuator ideal for: Optical focusing, scanning, interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, biotechnology, and semiconductor test equipment.
Motion Control – 18 Compact Low-Profile Pull Type Clapper Solenoids Are Designed to Meet the Size, Voltage, Duty Cycle, and Force Requirements of Your Application!
June 23rd, 2025 Editor Motion Control – Compact Push/Pull Solenoids
Motion Control – Van Nuys, CA – The S-08-54 Series of Low-Profile Pull Type Clapper Solenoids from Magnetic Sensor Systems (MSS) are just 0.54 in (13.8mm). in diameter and 0.80 in (20.3mm). long and the overall extended length is 1.08 in (27.4mm).
