Motion Control – Miniature Linear Slide

Motion Control – Precision Manual XYZ!

Van Nuys, CA —– Motion Control – This manual crossed roller XYZ-axis positioning stage is made of aluminum alloy with an black anodized coating. The table size is 25 x 25 mm has a body weight of 0.16 Kgf. The maximum load of this super thin table is 1 Kgf. The movement accuracy is Straightness 5µm ,Vertical yawing 30″ and Parallel yawing 25″.

Motion Control – Absolute Encoder for Harsh Environments

Vaughan, Ontario, Canada — Motion Control Components — Netzer VLX encoders are ideal for OEM applications. Featuring an open frame, 2 plate design, the sensor is lightweight, highly tolerant to temperature, shock, EMI, RFI and magnetic fields. It offers a unique combination of high performance at an economical cost.

The VLX-60 is a new member of the VLX series of Electric Encoders™ a product line based on Netzer Precision Motion Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance including:

Motion Control – Pan-Tilt Stage

Van Nuys, CA – Motion Control – High Resolution, Motorized, Pan-Tilt Stages have been added to the extensive line of OES (Optimal Engineering Systems, Inc.) motion control products. These motorized Pan-Tilt Stages are available in two sizes. The PT60-1 Pan-Tilt Stage is a combination of two 60 mm (2.362 in.) rotary stages and the PT100-1 is a combination of two 100 mm (3.937 in.) rotary stages, set at a 90 degree angle to each other. The rotary stages of each Pan-Tilt stage features a high repeatability of 0.005 degrees (18 arc-sec), a positional accuracy of 0.005 degrees (18 arc-sec), and a resolution of 0.001 degrees = 3.6” (10 Micro-steps per Step Motor Driver in use).

Motion Control – Electric Cylinder Has Zero Cogging

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control Tutorial – Motor Constant in DC motor sizing

Linear Motion Products Published FREE!

Get your Linear Motion Product published for FREE on https://linearmotionblogger.com! For details go to
https://motioncontrolmarketing.com

Fluid Power Products Published FREE!

Get your Fluid Power Products published FREE on http://fluidshop.com! For details go to https://motioncontrolmarketing.com

These are limited time offers

Motion Control – High Speed Linear Bearings

E. Longmeadow, MA – Motion Control – LM76’s high speed, “Black Racer,” ceramic coated linear bearings out perform linear ball bushing and linear polymer bearings in high speed and high acceleration/deceleration applications. These drop in replacement linear bearings are designed to be used in standard open and closed pillow blocks. “Black Racer” linear bearings are ideal for: Rocket sleds, crash test systems, and other high speed, high acceleration application.

Motion Control – Electric Cylinder!

Van Nuys, CA — motion control – Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – Electric Cylinder

Vaughan, Ontario, Canada — Motion Control Components — Introducing the 35mm diameter CBL35C electric cylinder with built-in controller from SMAC Corporation. With its built-in controller, the CBL35C controls force, position and velocity and features simple installation.

With outer diameters of only 43mm to 90 mm, these frameless brushless servo motors are extremely compact.

Ideal for applications with limited space but requiring accurate control, the CBL35C provides significantly longer life, programmability, high speed, accuracy, and energy efficiency while remaining price-competitive.

Motion Control – Pick & Hold Solenoids

Van Nuys, CA – — Motion Control – A compact, PWM, high performance Pick-and-Hold Solenoid Driver Module, the PH-ET series from Optimal Engineering Systems, Inc. (OES) is designed to energize one or two solenoids independently. It avoids overheating of the energized solenoid coils even for indefinite hold times.

Motion Control – Planetary Gearbox

Motion Control Components – The SPH inline planetary gearbox available from Electromate is GAM’s latest solution for today’s demanding motion control challenges! 

Vaughan, Ontario, Canada — Motion Control Components — It is available in six frame sizes with nominal torque ratings from 15 to up to 900Nm. The SPH features precision cut helical gears that are ground for smoothness, quiet operation, and high accuracies.

The face width of the SPH gears are up to 70% longer than the gears in comparable gearboxes on the market, which means more tooth contact and greater overall torque density. To carry the higher torques, SPH gears are case hardened which imparts strength deeper into the gear compared to nitriding which hardens just the surface. With several output configurations available, machine integration is simplified.

Motion Control – Vertical Lift Stage

Van Nuys, CA – — Motion Control Components – The AT20-100 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES) is a very stable, high precision, high load vertical lift stage that can be easily integrated into almost any application. The large 120 mm x 180 mm (4.72 in. x 7.08 in.) drilled and tapped platform has a vertical travel of 100 mm (3.93 in.) and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy. The precision ground lead screw, precision linear bearings, and the rigid box construction of the moving component of the elevator stage assures smooth, flat (parallel to mounting surface) vertical motion.

Motion Control – Miniature Spiral Bevel Gearboxes!

Vaughan, Ontario, Canada — Motion Control Components – The VP Series Performance Plus miniature spiral bevel gearboxes pack high performance in a small package with the highest torque density, range of ratios, and torque capacity on the market.

Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 In.).

Motion Control – Electric Cylinder

Van Nuys, CA – Motion control – New, patent-pending, SDLM-051 direct drive linear motors with built-in encoder from Moticont eliminate backlash and provide users with high acceleration, high speed, high resolution, and long life. Available in several off-the-shelf models, these direct drive linear motors feature resolutions of 5.2 µm (0.000206 in.), 1.25 µm (0.000049 in), and sub micron resolution. Compact, only 2 in. (50.8 mm) in diameter and 3.75 in (95.3 mm) long, and with the linear optical quadrature encoder inside directly connected to the shaft for the great-est possible accuracy, these motors can be easily integrated into new and existing applications using threaded features on the front and rear faces of the motor, as well as each end of the shaft.

Motion Control – “New Design” Pillow and Flange Blocks!

E. Longmeadow, MA  — Motion Control  – Linear Motion – Lubricating Stainless Steel and Self-Aligning Linear Ball Bearings has never been easier! “New Design” pillow blocks and flange blocks from LM76, features a lubrication fitting, and an alignment set screw in the pillow blocks and flange blocks, and the Stainless Steel and self aligning linear bearings are modified by having an alignment flat ground on the bearings’ outer shell and drilling a hole through the outer shell.

Lubricants can then be pumped directly inside of linear ball bearing races without having to remove the bearing from the shaft. The Pillow and Flange Blocks also have been designed to accommodate an encapsulated ETX Scraper Seals that prevents contaminants from getting inside the bearing and retains the lubricant in the bearing.

Motion Control – Vertical Rotary Stage

Van Nuys, CA – — Motion Control – The precision AR59-AV Motorized, 30 mm Clear Aperture Vertical Rotation Stage from Optimal Engineering Systems, Inc. (OES) features a 180:1 precision worm drive and deep grove ball bearings for a high resolution of ± 0.001O when microstepping (10 micro steps-per-step). The parallelism of the table is less than 50µm. The AR59-AV vertical rotation stage is ideal for: Micro robotics, metrology, vision systems, positioning of mirrors and lasers, laser machining or scribing, electronic assembly, testing, and photonics.

Motion Control – FDA-USDA-3a-Dairy Compliant Linear Slides

Motion Control – Application – Linear Slides

Sometimes, an application leads you to an immediate, off-the-shelf solution – like this one. Harvesting bee honey is a seasonal opportunity and these systems are hauled across the country to make it happen. They need to be all weather, tough and maintenance-free. The next time you take some honey and put it in your tea, think of us – LM76.