Motion Control – Servo Controller for Non-commutated Devices! Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25     Forestville, CA, – Motion Control — The SCA601 Linear Servo […]

Motion Control – Integrated Servo Motor JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors       Vaughan, Ontario, Canada — Motion Control Products – JVL, the European leader in the development of integrated servo and stepper motor […]

Motion Control – Miniature Voice Coil Motor     Van Nuys, CA – Motion Control Components – Smaller in diameter than a United States quarter, the miniature Linear Voice Coil Motor, LVCM-019-016-02, from Moticont has a high force-to-size ratio! It produces 8.9 oz. (2.5 N) of continuous force and 28.0 oz. (7.8 N) of peak […]

Motion Control – Single & Dual Axis Linear Slides   E. Longmeadow, MA – Motion Control – New! Precision! Low cost! “Basic Linear Motion Slides” from LM76 are available with self lubricating, MinutemanTM Series, Teflon® composite bearings or exceptionally low friction steel jacketed linear ball bearings. The “Basic Linear Slide” consist of 2 precision drilled […]

Motion Control – Integrated Stepper Motors Vaughan, Ontario, Canada — Motion Control Components — After the successful introduction of the complete range of ServoStep integrated motors JVL is now releasing Add-On-Instructions for fast and easy setup and programming in Rockwell Automation’s Studio 5000 software.   All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and […]

Motion Control – Hollow Core Linear Voice Coil Motors Van Nuys, CA – Motion Control – The high performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required.     The hollow core motorized linear stages are fully self-contained. Each stage utilizes […]

Motion Control – Sleeve Type Linear Bearings LM76 has two standard options for sleeve-style linear bearings when replacing linear ball bearings. Same format, dramatically different results.

Motion Control – Precision Positioning Stages!     Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of […]

Motion Control – Miniature Stepper Motor Stage     Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor […]

Motion Control – New Single Axis Motion Controller!  This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive     Vaughan, Ontario, Canada — Motion Control -The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models.  Like all […]

Motion Control – FDA/USDA/3A-Dairy Compliance Brochure E. Longmeadow, MA — Motion Control Components – Linear Motion – Food processing and beverage plants’ wash down areas are unique environments that undergo harsh treatment from high pressure washers, steam, and a multitude of caustic chemicals used in the cleaning and sanitizing production equipment.

Motion Control – Alignment Stage! Van Nuys, CA – — Motion Control -Optimal Engineering Systems, Inc. (OES) has introduced the XYR-300-400 Alignment Stage offering +/- 3 micron accuracy for industrial, medical, semiconductor, production, research, and laboratory applications.  The XYR-300-400 Alignment Stage features +/- 15 mm of travel in the X and Y axes and +/- […]

Motion Control –  Electric Cylinders! Van Nuys, CA — Motion Control – The SDLM Series of Electric Cylinders from Moticont now includes a 1.0 inch (25.4 mm) stroke actuator in their compact 0.750 in. (19.1 mm) diameter series of linear actuators. The new SDLM-019-095-01-01 actuator features a continuous force of 6.8 oz (1.9 N) and […]

Motion Control – Linear Bearings – Comparison: Ceramic Coated vs Linear Ball Bearings      

Motion Control – Motorized Rotary Stage!       Van Nuys, CA —– Motion Control – Rotary Stages – A rotary stage is a component of a motion system used to restrict an object to a single axis of rotation. The terms rotary table or rotation stage are often used interchangeably with rotary stage. Our […]

Motion Control – Mini Planetary Gearmotors! Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications       Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  TThese […]

Motion Control – JetRail Linear Bearings Application Motion Control – Because LM76 understands workplace environments, manufacturing processes, and offers a complete line of linear bearing systems, LM76 was able to solve a problem and eliminate downtime!     E. Longmeadow, MA –  Motion Control — When profile rail guides fail within a week bring production […]

Motion Control – NEW! Three-axis Gimbal Mounts!       Van Nuys, CA —– Motion Control – OES (Optimal Engineering Systems, Inc.) has released four all new Three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high precision and high stability AU270-AER Gimbal Mounts locate the surface of the Roll Stage 115 mm below […]

Motion Control – Robotic Cycloidal Gearbox!     Vaughan, Ontario, Canada — Motion Control Components — GAM announces the release of the new GCL cycloidal gearboxes. The new gearboxes provide high precision and rigidity for horizontal and vertical robotic and motion control applications. The GCL is designed to withstand the frequent start-stop impact loads of […]

Motion Control – Hollow Core Voice Coil Motor! Van Nuys, CA — Motion Control – Moticont introduces an open aperture (hollow core) voice coil or moving coil linear motor from Moticont, the HVCM-051-025-013-01. Featuring an open aperture of 0.50 in. (12.7 mm) this low cost, clean room friendly non-commutated motor is available off-the-shelf. The light […]