Stepper Motors – Motion Control Blogger

Motion Control – A New Series of Pitch, Roll, and Yaw Positioning Stages Feature High Resolution and Repeatability!

September 22, 2025 Editor

Motion Control – Pitch, Roll, and Yaw Stages

Motion Control – Van Nuys, CA – The new YPR-45-45-100 Series of Pitch, Roll, and Yaw Three-axis Stages are the integration of two +/- 45 degrees Goniometers for lower (pitch) and middle (roll) axes, and a large upper, 100 mm diameter, Rotary Stage (yaw axis). The integration of goniometers and rotary stage enables the identifying of crystals, estimating hyperspectral bidirectional reflectance, measurements of radiation patterns of LEDs, manufacturing of quartz oscillator plates using quartz cutting X-rays, examining cutting edges of medical instruments, gloss measurements, laser machining and drilling, aligning mirrors, tracking and scanning.

Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!

August 11, 2025 Editor

Motion Control – ZGG Stage – Lift Plus Dual Goniometers

Van Nuys, CA – Motion Control – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact motion control stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.

See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA

Motion Control – The 30 MM Vertical Lift Stage Features 0.2 Sub-micron Resolution, Very High Parallelism!

July 07, 2025 Editor

Motion Control – Precision Lift Stages

Motion Control Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) has released the AT20-30 series of Motorized Vertical Lift Stages featuring sub-micron resolution, very high parallelism and a vertical lift of 30 mm.

Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!

May 19, 2025 Editor

Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages

Watch on YouTube– https://youtu.be/2ymH0TjI3Vc

Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel.

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

April 07, 2025 Editor

Motion Control – XYZ Axis Stages to Suit Specific Applications!

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths for each axis, 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Any combination of lengths, motors, and lead screws are available.

Motion Control – Video – Dual-axis Alpha-Beta Goniometers

March 03, 2025 Editor

Motion Control – Video – Dual-axis Alpha-Beta Goniometers

Motion Control Stages – Dual Axis Alpha-Beta Goniometer Stage
To View the Motion Control Video Click “HERE”

Motion Control – Video – Van Nuys, CA – Goniometer Stages can measure angles of objects such as crystals or move an object to a precise angular position along an arc, in relation to a fixed point in space. Two goniometer stages mounted in an alpha-beta configuration (stacked) can rotate an object around a fixed point in space on a spherical surface.

Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!

December 10, 2024 Editor

All Motion Control – Multi-axis Motion Controllers

Van Nuys, CA – All Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.

Motion Control – Low Profile, High Precision Motorized Cross Roller Linear Stages

October 22, 2024 Editor

Motion Control – Precision Linear Stage

Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in). Open loop repeatability of all stages is 0.5µ using a 10 mirco- steps-per-step Step Motor Driver or just 0.25µ using a 20 mirco-steps-per-step Step Motor Driver. Precision ground lead screws with just 2µ of backlash and high precision cross roller linear travel guides assures repeatability of 5µ, and positional accuracy of 10µ.

See the YouTube Video: https://youtu.be/qRsjeChhEWo

Motion Control – NEW! A Series of 600 mm to 1000 mm High Precision Ball Bearing Linear Guide Stages Available from OES!

September 10, 2024 Editor

Motion Control – Long Travel Linear Stages

Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. These high precision stages can be ordered with a Two-Phase Stepper Motor (pictured) which feature resolutions of 2 micron and 1.25 micron (achieved with a 10 or 20 micro-steps per step stepper motor driver), and up to 80 mm per sec of travel.

Motion Control – High Precision, Low Profile, Compact 40 mm Motorized Rotary Stages!

July 30, 2024 Editor

Motion Control – 40 mm Diameter Rotary Stage!

Van Nuys, CA – Motion Control – The AY110-40-01 Rotary Stage (pictured) from Optimal Engineering Systems, Inc. (OES) offers the users a high precision, low profile, compact motorized rotary stage.

Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options

May 28, 2024 Editor

Motion Control – Solenoid Drivers

Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide by 463 mm high, and handle loads up to 10 kg. The AU400-AER (Azimuth, Elevation, and Roll) Series of Three Axis Gimbal Mounts feature high precision 180:1 worm gear driven “V” groove rotary stages.

Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!

March 02, 2024 Editor

Motion Control – Yaw and Pitch Stages

Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.

Category Archives: Stepper Motors

Motion Control – A New Series of Pitch, Roll, and Yaw Positioning Stages Feature High Resolution and Repeatability!

Motion Control – Pitch, Roll, and Yaw Stages

Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!

Motion Control – ZGG Stage – Lift Plus Dual Goniometers

See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA

Motion Control – The 30 MM Vertical Lift Stage Features 0.2 Sub-micron Resolution, Very High Parallelism!

Motion Control – Precision Lift Stages

Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!

Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

Motion Control – XYZ Axis Stages to Suit Specific Applications!

Motion Control – Video – Dual-axis Alpha-Beta Goniometers

Motion Control – Video – Dual-axis Alpha-Beta Goniometers

Motion Control Stages – Dual Axis Alpha-Beta Goniometer Stage
To View the Motion Control Video Click “HERE”

Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!

All Motion Control – Multi-axis Motion Controllers