Category Archives: Stages – Voice Coil

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

 

motion control - electric cylindermotion control - moticont

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control – Get Zero Cogging and High Throughput from Low Cost Moticont Linear Actuators!

Motion Control – Electric Cylinder!

motion control - electric cylinder


motion control - moticint

 

Van Nuys, CA — Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – Open Aperture Voice Coil Stages Feature 1.20 Inches of Travel and Resolutions of 29.95 and 25.4 Microns!

Motion Control – Open Aperture Voice Coil Stages!

motion control - voice coil stagemotion control - moticont

 

Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up.

Motion Control – Linear Voice Coil Motor Tolerates Tilting

Motion Control – Linear Voice Coil Motor Tolerates Tilting

motion control - voice coil motors


motion control - moticontVan Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). 
Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

Motion Control – Stage Features 200 Nanometers Repeatability!

motion cotrol - miniature xy stage
motion control - miniature components

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – Compact Direct Drive Linear Actuator Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control –  Linear Actuator features Increased Throughput!
motion control - linear actuators


motion control - moticont

 

Van Nuys, CA – Motion Control – The Compact SDLM-051-070-01-01 Direct Drive Linear Actuator with integrated position and temperature sensors is the latest addition to the patented series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life actuators from Moticont. This direct drive linear Actuator, also referred to as an Electric Cylinder is 2.000 in. (50.9 mm) in diameter and the compact housing length is just 2.750 in (69.9 mm).

Motion Control – Miniature PVS 30.5 Parallelogram Voice Coil Stage from Equipment Solutions!

Motion Control – Miniature Parallelogram Voice Coil Stage!

motion control - miniature stages


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexture guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Motion Control – Hollow Core Voice Coil Motor


Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).
motion control - moticont

The hollow core allows for optics, illumination, laser beams, or cables to pass through.

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Motion Control – Miniature Stepper Motor Stage

motion control - miniature components

 

Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Servo Controller for Non-comutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-comutated Devices!

motion control - Voice Coil Motor Controller

SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Miniature Linear Focus Actuator Features <50 Nanometer Positioning Resolution!

Motion Control – Miniature Linear Focus Actuator

motion control - linear focus actuator

LFA-1007 Linear Focus Actuator: 10mm clear aperture, 7mm range of motion, <50 nanometer positioning resolution, 50 grams moving mass, 70 x 70 x 50 (600g)

 

motion control - miniature components

Forestville, CA — Motion Control Linear Focus Actuator – The LFA-1007 is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control – Linear Focus Actuator Features, 20 mm Clear Optical Path, <50 nanometer Repeatability, and <3 miliseconds Response Time!

Motion Control – Linear Focus Actuator

Forestville, CA –The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

motion control - miniature components

The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds. This high force, low noise voice coil motor is typically configured with an analog position feedback sensor and can be optionally equipped with a 1um resolution digital quadrature feedback element.

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage From Equipment Solutions Is a Complete Positioning System!

Motion Contol – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – Compact, Open Aperture Voice Coil Stages Features 1 Micron and 30 Micron Positioning Resolutions!

Motion Control – Hollow Core Voice Coil Stage

motion control voice coil stage

Van Nuys, CA – Motion Control – The compact open aperture HCDS-051-032-013-01-B1-30 and the HCDS-051-032-013-01-B1-01 Voice Coil Stages from Moticont have a foot print of just 2.000 in. (50.8 mm) wide by 5.000 in (127.0 mm) long and feature positioning resolutions of 30 microns and just 1 micron respectively. These precision stages allow the user to select the level of precision needed for an application.

motion control - moticont

The 1 micron resolution HCDS-051-032-013-01-B1-01 Voice Coil Stage features cross roller linear bearings whereas the 30 micron HCDS-051-032-013-01-B1-30 Voice Coil Stage uses linear ball bearings. Each of these stages has a 0.97 in. (24.6 mm) range of motion with 6.3 lb. (28.2 N) of continuous force and 20.0 lb (89.9 N) peak force. These brushless, clean, quiet, efficient, low inertia, high acceleration, zero cogging and high speed voice coil driven stages have a built-in home switch for accurate initialization. As the coil is fixed and the magnetic assembly moves, there are no moving electrical components to fail. Designed for closed loop servo operation an integral quadrature optical encoder with differential outputs is included..

The stages’ 1.509 in (38.3 mm) x 2.000 in. (50.8 mm) tables are equipped with 4 8-32UNC-28 mounting holes. Pre-drilled and counter-bored mounting holes in the base of the stages and a plug -and-play wired connector allows for easy integration into new or existing applications. These black anodized voice coil stages with a 0.500 in (12.7 mm) clear aperture are ideal for: Laser drilling and machining, optical focusing, testing, laser steering, mirror positioning, scanning, oscillation, switching, as well as precision applications in industrial, medical, metrology, and research fields.

The HCDS-051-032-013-01-B1-01 and HCDS-051-032-013-01-B1-30, Voice Coil stages are also available in XY or XYZ configurations, and can also be ordered as a complete plug-and-play system with a controller. Please consult our engineers if your application requires others parameters such as: Range of motion, continuous or peak force, and multi axis configurations.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont

 

 

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

Motion Control – Miniature Positioning Stage

 

 

Forestville, CA, – — Motion Control Positioning Stage – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system. Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

The PVS-5.5 Parallelogram Voice Coil Stage features a high force, frictionless voice coil motor and infinite life flexure system that provides superior responsiveness and accuracy (positioning resolution 75 nm) over conventional lead screw or belt drives and produces the least amount of electrical noise of any motor currently available. The stage can be mounted in a horizontal or vertical position and for easy integration tapped and clearance holes are provided in the base.An integral sub-micron linear displacement sensor with high bandwidth and low noise for high responsiveness and precise movements featuring frictionless optical technology completes this positioning system. This cleanroom compatible positioning system is low cost and uses ±12 V to ±24 V @ 1 A. The PVS-5.5 Parallelogram Voice Coil Stage is available with the Equipment Solutions, Inc. SCA814 Servo Controlled Amplifier, and to aid integration into a new or existing application CAD drawings are available on the Equipment Solutions, Inc, Website at http://www.equipsolutions.com.

 

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

 

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Equipment Solutions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog

 

Motion Control – LFA-3404 Linear Focus Actuator from Equipment Solutions

Equipment Solutions

Forestville, CA –The motion control LFA-3404 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The motion control LFA-3404 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.   

The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques. By design, the LFA-3404 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation.  Product manufacturing tolerances are closely monitored so that both lateral and angular displacements about the motion axis are as small as possible.

Specifications

Motor Force Constant

Interface Drawings

 

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

 

 

Sunnyvale, CA, – — Motion Control Positioning Stage – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system. Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

The PVS-5.5 Parallelogram Voice Coil Stage features a high force, frictionless voice coil motor and infinite life flexure system that provides superior responsiveness and accuracy (positioning resolution 75 nm) over conventional lead screw or belt drives and produces the least amount of electrical noise of any motor currently available. The stage can be mounted in a horizontal or vertical position and for easy integration tapped and clearance holes are provided in the base.An integral sub-micron linear displacement sensor with high bandwidth and low noise for high responsiveness and precise movements featuring frictionless optical technology completes this positioning system. This cleanroom compatible positioning system is low cost and uses ±12 V to ±24 V @ 1 A. The PVS-5.5 Parallelogram Voice Coil Stage is available with the Equipment Solutions, Inc. SCA814 Servo Controlled Amplifier, and to aid integration into a new or existing application CAD drawings are available on the Equipment Solutions, Inc, Website at http://www.equipsolutions.com.

 

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.
For additional information contact Jeff Knirck at Equipment Solutions, 1098 West Evelyn Ave. #102, Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail:info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Equipment Solutions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog

 
 

Motion Control Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Acceleration!


Sunnyvale, CA, —Linear Motion – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

The VCS-1010D linear motion positioning stage (pictured) features a 10 mm clear aperture and a 1 μm resolution digital position sensor, with differential quadrature outputs and a center index pulse. The highly responsive, frictionless voice coil motor has been optimized to keep the moving mass as low as possible for the fastest response times, and it has the lowest electrical noise of any motor type. These compact 76 X 41 X 38 millimeter linear motion stages weigh only 255 grams and can be operated horizontally or vertically. Multiple sets of mounting holes allow for easy integration into new or existing applications.

These versatile VCS-10 linear positioning stages can be custom configured to meet the users requirements. As an example, is the custom VCS-1010D (pictured) with a 6mm lens and manual cross-axis adjustments.Equipment Solutions is a leading authority in the field of linear motion voice coil stages. Recognizing that exceptional performance can only be achieved through a system level approach, ESI also has extensive servo electronics expertise. Equipment Solutions motors and actuators are used in markets ranging from applications where our actuators delicately guide a laser beam over an eye as part of a vision enhancement procedure to military hardware that is battlefield certified, and everything in between.

With a time-to-market as short as four weeks, Equipment Solutions has maintained innovative, high quality products. Equipment Solutions, never loses sight of the value of listening very carefully to client input, nurturing a cooperative working relationship, understanding the big picture but never losing sight of the small details that describe it, and perhaps most importantly, following through with after delivery support.

For additional information contact Jeff Knirck at Equipment Solutions, 1098 West Evelyn Ave. #102, Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail:info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Equipment Solutions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog