Category Archives: Servo Motors

Motion Control – 3/4 Inch Diameter Voice Coil Motor Features: High Speed, High Acceleration, and High Force to Size Ratio!

Motion Control – 3/4 Inch Diameter Voice Coil Motor!

motion control - voice coil motor


motion control - moticintVan Nuys, CA – Moticont has introduced the GVCM-019-016-02 Linear Voice Coil Actuator (Linear DC Motor). This small 0.75 in. (19.1 mm) diameter actuator, also called an Electric Cylinder, has a high force to size ratio of 7.4 oz (2.1 N) continuous force and 23.7 oz (4.4 N) of peak force and a stroke length of 0.250 in. (6.4 mm). The housing measures just 0.625 in. long and in the fully extended position the shaft extends 0.436 in. (13.5 mm) beyond the face of the housing.

Motion Control – Don’t Just Settle! Select the “Right” Miniature Linear Voice Coil Motor for the Application!

Motion Control –  Miniature Linear Voice Coil Motor!

motion control - moticont

motion control - moticint

 

 

Van Nuys, CA — Motion Control Components – Moticont has added two miniature linear voice coil motors to its LVCM family of Linear Voice Coil Motors! Sharing the same physical dimensions, each is just 1.000 in. (25.4 mm) in diameter and the housings are 1.500 in. (38.1 mm) long. As every application is different Moticont offers two motor in the LVCM-025 Series of Voice Coil Motors. The LVCM-025-038-01 features a continuous force of 2.5 lbs (11.0 N) and a peak force of 7.8 lbs (34.7 N) and the LVCM-025-038-02 features a 1.000 in (25.4 mm) stroke, whereas, the LVCM-025-038-01 features a stroke of 0.37 in. (9.5 mm ) and the LVCM-025-038-02 features a continuous force of 16.4 oz (4.6 N) and a peak force of 51.9 oz (14.4 N).

Motion Control – Long Travel and High Torque Rotary Voice Coil Actuators from H2W Technologies!

Motion Control – High Torque Rotary Voice Coil Actuators

motion control - rotary voice coil torque motor

motion control - H2W Technologies

 

 

 

Santa Clarita, CA — Motion Control – H2W Technologies has developed several high torque rotary voice coil actuators, otherwise known as a limited angle torque motors or LATs. The model TWR-034-800-1RC was designed to allow for a relatively low moving mass and inertia, as well as a long rotary stroke of 34 degrees [0.59 radians] on a 11.4” [290 mm] arm, which equates to a travel of 6.75 inches [171.5 mm] which is long travel for this style of actuator, which typically restrained to an equivalent linear travel of 2 inches [50.8 mm]. This rotary voice coil actuator can generate a continuous torque of 1400 in-oz [9.8 N-m] and a peak torque of 4200 in-oz [29 N-m] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off) in each coil on a 11.4 inch [290 mm] rotation arm.  The TWR-034-800-1RC has a total angular displacement of  34 degrees [0.59 radians] and a motor constant of 275 in-oz/sqrt(watt) [1.92 N-m/sqrt(watt)].

The Voice coil motor requires 1.7 amps of continuous current per coil and 5.1 amps of peak current per coil to generate the specified forces.  The actuator fits in and envelope of 10.26 in [260.5 mm] x 3.01 in[76.4 mm] x 3.39 in [86 mm].  The moving coil design ensures a hysteresis free movement as the coil is wet wound and self-supported, and the non-commutated coil allows for ripple-free motion and no cogging.  The voice coil actuator has been designed with mounting provisions in the magnet and coil assemblies.  This allows for the integration of a bearing system to maintain the clearances between the coil and permanent magnetic field assemblies. The rotary voice coil actuator is ideal for applications requiring high torque and high- speed applications. Examples of such applications are driving a gimbal axis in scanning applications as well as providing stabilizing torques for image stabilization. More examples of H2W’s Rotary Voice Coils are available on our website: https://www.h2wtech.com/category/rotary-voicecoil-actuators

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://LinearmotionBlogger.com

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

H2W YouTube Channel

H2W Technologies Blog

motion control- h2w

 

Motion Control Components Application Exoskeleton! – Maxon Driven – Focus – 2020 Cybathlon!

Motion Control – Application Exoskeleton

“People with disabilities are only disabled if they come up against the insurmountable. But where do the obstacles in our everyday lives come from? From barriers in our minds” … Cybathlon founder Robert Riener.

Motion Control - Application Exoskeleton

 


motion control - maxonCYBATHLON is so much more than a competition, it is intended to serve as a platform between technology developers, people with disabilities and the public. It’s bringing everyone together under one roof to see where the challenges are and to work towards developing technologies that make everyday life easier for those with physical disabilities.Taunton, MA — Motion Control Components Application – maxon’s DRIVEN magazine just released a special issue focusing on the 2020 CYBATHLON to be held in Zurich on September 19th and 20th.This is an event where people with physical disabilities compete against each other in obstacle courses with the use of assistance systems such as exoskeletons, bionics prostheses and motorized wheelchairs.

We, at maxon, are very excited to be a part of this special event. Our drives are perfectly suited for these application – they are precise, compact and extremely efficient. We look forward to seeing all the latest developments and working with the developers on the next generation of assistance systems.

Enjoy this latest issue and if you see a story you’d like to share with your readers, I’d welcome the opportunity to discuss this with you.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - workbook


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!

Motion Control – ATTENTION – Ventilator Manufacturers!

motion control - ventilator components

 

motion control - electromate

 

 

Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.

Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.

These include:

  • HMI’s
  • Linear guides
  • Linear actuators
  • Screw assemblies
  • Compact gearboxes
  • High efficiency servo & stepper motors
  • Programmable motion controllers and drives

Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.

We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.

All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.

Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.

In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.

CODE LIFE VENTILATOR CHALLANGE

The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.

motion control - medical components

To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/

 

 

MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY

MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:

Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?

Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.

motion control medical device components

To learn more, please visit https://e-vent.mit.edu/

 

 

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate - badge

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate

Motion Control – EC-i 52XL 200W High Torque Brushless Servo Motor from Maxon!

Motion Control – Brushless Motor 

motion control miniature brushless motor

 

Motion Control - Electromate-Logo

The new EC-i 52XL 200W Brushless Servo Motor from maxon is a powerhouse.  When space is limited but high torque and dynamics are required, the maxon EC-i 52XL motor is the ideal motor choice.. 

Vaughan, Ontario, Canada — Motion Control Components — With its extended length (80 ? 110mm), this motor with flux collector rotor provides outstanding torque performance compared to the existing EC-i 52 180W High Torque that is often needed, especially on the industrial automation front.

Its extra power can be even more significant at relatively low speed which makes it a powerful fit to a variety of industrial applications including material handling & transport systems.

Because of its optimized magnet ring, the brushless EC-i 52XL motor with an iron winding offers a very high torque density and a low cogging torque.  The multi-pole internal rotor is extremely dynamic.  Its solid design, with a steel flange and steel housing, makes this motor a robust solution for industrial applications.

Features include:

  • Cost-effective
  • 200 Watt Rated
  • 24, 36 & 48VDC windings
  • 8 pole pairs
  • Optional gearheads, encoders and drive electronics

Order your EC-i drive online now at-

EC-i 52XL 200W Brushless Servo Motor Buy Online

Information on the EC-i 52XL 200W Brushless Servo Motor from maxon can be viewed at:

EC-i 52XL 200W Brushless Servo Motor Specification

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Equipment Solutions are also featured on:

http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

 

Motion Control – LFA-3404 Linear Focus Actuator from Equipment Solutions

Equipment Solutions

Forestville, CA –The motion control LFA-3404 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The motion control LFA-3404 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.   

The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques. By design, the LFA-3404 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation.  Product manufacturing tolerances are closely monitored so that both lateral and angular displacements about the motion axis are as small as possible.

Specifications

Motor Force Constant

Interface Drawings

 

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool

Motion Control – Voice Coil Motor Features Higher Continuous Force and More Than 3 Times the Peak Force!

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont has added a new, higher continuous force, higher peak force linear voice coil motor to it’s series of 2.750 in. (69.9 mm) diameter x 3.50 in. (88.9 mm) long (housing) voice coil motors. The LVCM-070-089-03 linear voice coil motor features 40.86 lbs. (181.5 N) continuous force and 129.1 lbs. (573.4 N) peak force. This clean, quiet, efficient, low inertia, high acceleration, brushless high speed linear motor has zero cogging and features high accuracy, and a high repeatability to less than1 micron (0.00004 in.) when operated in a closed loop as a DC servo motor

This compact, more powerful motor is ideal for: work holding and clamping, antenna positioning, medical devices, assembly, testing, laser machining and drilling, wafer handling, optical focusing, dynamic vibration absorption, scanners and laser beam steering and filtering. The LVCM-070-089-03 linear voice coil motor linear motor has a stroke length of 1.00 in (25.4 mm). and is easily added to new or existing applications using 10-32 UNC-2B mounting holes on each end of the motor which can be order as a complete plug-and-play system including an encoder and controller.

Is there a need for a smaller or larger diameter motor, one with longer travel, or more force? There are 12 series of Moticont’s LVCM series motors based on diameter of the motor, and over 50 models based on length of stroke and/or force to select from. To find the right motor for you application go to http://moticont.com/voice-coil-motor.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – High Torque Rotary Voice Coil Actuators!

Linear Motion Control - H2W High Torque Voice Coil Actuators

 

Linear Motion Control - H2W Logo

Santa Clarita, CA —– Linear Motion Control – H2W Technologies has developed several high torque rotary voice coil actuators, otherwise known as a limited angle torque motors or LATs. The model TWR-015-346-2RC was designed to allow for a low moving mass (68 grams per coil) and inertia, as well as dual independent coils to allow for two independent motion profiles or couple the coils together to double the torque output. This rotary voice coil actuator can generate a continuous torque of 185 in-oz [1.29 N-m] and a peak torque of 555 in-oz [3.88 N-m] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off) in each coil on a 4 inch [102 mm] rotation arm. By coupling the coils together, the continuous torque doubles to 370 in-oz [2.58 N-m] with a peak torque of 1110 in-oz [7.75 N-m] at a 10% duty cycle.

The TWR-015-346-2RC has a total angular displacement of 15 degrees [0.26 radians] and a motor constant of 34.4 in-oz/sqrt(watt) [0.24 N-m/sqrt(watt)] per coil or when coupled together the motor constant is 48.5 in-oz/sqrt(watt) [0.34 N-m/sqrt(watt)]. The voice coil motor requires 1.33 amps of continuous current per coil and 4.0 amps of peak current per coil to generate the specified forces. The actuator fits in and envelope of 4.37 in [111.1 mm] x 2.99 in [75.9 mm] x 1.64 in [41.5 mm].

The moving coil design ensures a hysteresis free movement as the coil is wet wound and self-supported, and the non-commutated coil allows for ripple-free motion and no cogging. The voice coil actuator has been designed with mounting provisions in the magnet and coil assemblies. This allows for the integration of a bearing system to maintain the clearances between the coil and permanent magnetic field assemblies. The rotary voice coil actuator is ideal for applications requiring high torque and high-speed applications. Examples of such applications are driving a gimbal axis in scanning applications as well as providing stabilizing torques for image stabilization. More examples of H2W’s Rotary Voice Coils are available on our website: https://www.h2wtech.com/category/rotary-voicecoil-actuators

Technology

Simply stated, a current carrying conductor placed in a magnetic field will have a force (or torque) exerted upon it. This force is proportional to the direction and magnitude of the current and the flux density field. Since the permanent magnet flux density field is fixed, the direction of the rotation depends on the polarity of input current and the amount of torque that is produced is directly proportional to the magnitude of the input current.

Linear Motion Control - H2W High Torque Voice Coil Actuators - Drawing

 

 

 

 

 

 

 

 

 

 

A DC linear servo amplifier is required to provide power to the torquer.

Rotary voice coil actuators are supplied unhoused without bearings.

Coupling the rotary voice coil actuator to your bearing system and a rotary encoder or other feedback device yields a system that is capable of intricate angular position, velocity, and acceleration control.

Low moving inertia of the moving coil assembly allows for high angular acceleration of the payload.

Advantages:

  • No Torque Ripple
  • High Angular Acceleration
  • No Commutation
  • Zero Cogging
  • Brushless
  • Low Profile

Applications:

  • Aerospace
  • Semiconductor
  • Medical
  • Military

Rotary Voice Coil Motor – is an arc segmented multipole permanent magnet stator with a low inertia copper magnet wire rotor. Angular excursions are typically less than 90º. This torquer is supplied with out a shaft or bearing.

TWR Series Limited Angle Torque Motor

The TWR Series is comprised of a stationary, arc segmented, multipole permanent magnet stator assembly with a low inertia wound wire rotor.

Rotor: The rotor is made up of a single coil of bondable copper magnet wire. The coil is wound and preformed into the desired shape. It is held together with the bonding agents in the wire. It can be encapsulated with aluminum or plastic brackets in order to provide a means for mounting the rotor to the bearing system and payload. The maximum angular excursion is less than 90º.

Stator: The stationary stator assembly consists of multipole permanent magnets that are bonded to steel plates. The 2 opposing steel plates are spaced apart to provide a gap using end plates. The coil rotor assembly moves angularly within this gap. There is no magnetic attractive force between the stator and the rotor.

The TWR Series Torquers are available in 2 configurations.

The low profile (Type L) configuration has a smaller overall height which allows it to fit in a more compact space, but has less angular rotation for a given stator arc segment.

The second configuration (Type S) has a larger overall height but has typically twice the angular rotation per given stator arc segment when compared to the Type L torquer.

  • No Torque Ripple
  • High Angular Acceleration
  • No Commutation
  • Brushless
  • Low Profile

For Product Descriptions of High Torque Voice Coil Actuators CLICK HERE

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

 

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – Application – 3-D Laser Scanner Uses JVL’s MAC Motors!

Motion Control Application –

Scantech´s newest portable 3-D scanner utilises 2 JVL MAC motors

Servos from JVL used in 3D Scanner

JVL Logo

Birkerød, Denmark and Morrow, OH (USA) — Motion Control Application – Laser scanning is used to measure an object by scanning it with a laser and digitalising the data. Using this information, it is possible to copy or modify the scanned object in various ways using Scantech´s CAD/CAM system CARSO. The scanner system is used for restoration work, scaling models, and creating industrial moulds. For example, it is possible to scan a marble figure that is deteriorating, and use the CAD/CAM system and a 3-D lathe to produce a true copy of the pristine original. It is thus possible to save a lot of manual work.

Servos from JVL used in 3D Scanner

Mounted directly on a CNC machine, Scantech´s 3D laser scanners make the CNC an effective copying machine. Scantech´s products are fully compatible with all modern CNC machines, and increase both the machine’s productivity and potential.

Typical applications are in the stone and wood carving industries, but also in the foam and footwear industries and in the manufacture for example of industrial moulds. The machines are sold directly to well-known machine manufacturers throughout the world.

 

Servos from JVL used in 3D Scanner

The new St 400 scanner is a portable scanner that can be used anywhere. For motion control in the x- and y axes, Scantech chose JVL´s MAC motor MAC140-A1 with MAC00-B1 modules, owing to their compact design with motor, encoder, driver, and controller integrated in the same unit. The 2 MAC motors are connected to the same RS485 interface and are controlled via serial commands from a PC. JVL´s Active X (OCX) is used as the driver between Scantech´s C++ software and the MAC motors.

More information about:

Integrated Servo Motors MAC050-141Click Here

Expansion Module MAC00-B1Click Here

MacComm OCX FileClick Here

About JVL – JVL is recognized as a world leader for its development of efficient and compact integrated motors for VAC and VDC. MAC motor series of integrated VAC servo motors (up to 4500W and 13,5kW peak), and the QuickStep integrated stepper motors (up to 25Nm). Both the servomotor and stepper motor series includes the controller, PLC, encoder, power supply and bussystem integrated into one compact unit. All industrial Ethernet protocols like Profinet, EtherCAT, Ethernet/IP, Modbus TCP, Powerlink, Sercos III etc. are available. Furthermore, traditional modules likeCANopen, DeviceNet, Profibus, Nano PLC, RS232/RS485/USB, Process Control can be incorporated.

JVL has more than 25 years of motion control experience and enjoys a reputation for the development of highly specialized integrated motors with industrial Ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications.

JVL’s wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.

JVL USA • Att: Mike Fisher • National Sales Manager
8610 Morrow-Rossburg Rd • Morrow • OH 45152-9444
E-mail: mfisher@jvlusa.com • Tel.: 513/877-3134 •Tel.: 513/282-0888 (Tech Support Line) •
Fax: 513/877-2471•
For Additional Information about Mike Fisher and JVL USA – Click Here

 

USA and Canada – Reps & Distributors: – Click Here

 

All Other Countries:

Further information can be obtained from:

JVL Industri Elektronik A/S

Blorkken 42, DK 3460, Birkerød, Denmark

E-mail: jvj@jvl.dk Tel.: +45 4582 4440 ; Fax.: +45 4582 5550 ;

For JVL Home Office and World Wide Directory of Reps & Distributors Click Here

JVL Logo
Visit our Website
Order Our Catalog
Request Newsletter
JVL-Trade Fairs
Twitter Link
Facebook Link

Motion Control Voice Coil Motors & Voice Coil Position Actuators!

motion control voice coil motorsMotion Control – Akribis Systems Voice Coil Motors & Voice Coil Position Actuators Available from Electromate!

 

Motion Control - Electromate-Logo

Woodbridge, Ontario, Canada — Motion Control – A “voice coil” is a generalized term that refers to any galvanometer-like mechanism that uses a solenoid to move an object back-and-forth within a magnetic field.

Voice coil actuators, or non-commutated DC linear actuators, consist of a permanent magnetic field assembly (permanent magnets and ferrous steel) and a coil assembly. The current flowing through the coil assembly interacts with the permanent magnetic field and generates a force vector perpendicular to the direction of the current. The force vector can be reversed by changing the polarity of current flowing through the coil.

Voice coil actuators are typically used in focusing applications, oscillatory systems, mirror tilting, and miniature position control.

 

Electromate offers a full family of Voice Coil Motors & Voice Coil Modules from Akribis Systems. Features include:

  • Direct drive, zero cogging, and zero backlash
  • Low coil mass with very fast response and bandwidth
  • No contact between coil and core movement (no wear and tear)
  • Cylindrical or rectangular shape
  • A variety of Voice Coil Motors and Voice Coil Modules (Position Actuators)
  • Smooth motion at low speeds with limitless resolution (depends on feedback device)

More information on the Motion Control Akribis Voice Coil Motor & Voice Coil Module Family. http://www.electromate.com/voice-coil-motors.html – Click Here

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 FREE (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link

 

Motion Control – ElectroCraft EXC-Series 2.3-inch AC Servo Motors!

Servo2Go - Electrocraft EXC23 Series Servo Motors

High Voltage. High Performance.

Servo2Go-Logo

Greenville, DE –— Motion Control – The new EXC-Series 2.3-inch AC Servo Motors, are high voltage, high performance brushless servo motors incorporating the latest electro-magnetic components creating high continuous torques with low inertia for rapid acceleration. They are available with hall-effect commutation or encoder feedback and a variety of connection options.

The Motion Control EXC-Series 2.3-inch AC Servo motor offers customers high economic value and superior reliability. The EXC-Series is a cost-improved version of the popular Excalibur family of AC Servo motors sold under the Rockwell Automation brand. This product provides considerable cost improvements for a variety of light industrial, commercial, and medical applications.

The EXC-Series are fast, low vibration BLDC motors. By utilizing M-8 ceramic and rare-earth neodymium magnets, these BLDC motors provide the quick acceleration and consistent speed (up to 15,000 rpm) needed for applications such as centrifuges, fans and pumps. Sealed ball bearings and reduced torque ripple from skewed magnetization also ensure a smooth operation at any speed..

Click on the link below to view the specification on ElectroCraft’s EXC-Series 2.3-inch AC Servo Motors–

http://www.servo2go.com/product.php?ID=105484&cat=

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link

Motion Control – Brushed Rotary Servos to 500 Watts from Trust Automation!

High Quality, Low Inertia, Low Torque Ripple Brushed Servo Motors.Motion Control Brushed Servos to 500 Watts from Trust Automation

Trust Automation Motion Control

San Luis Obispo, CA –Motion Control – The Trust Automation SE500 Series Motion Control Brushed Servo Motors are compact, high quality motors designed specifically to reduce motor size while increasing motor torque. The torque ripple is low, approximately .3% of the rated motor torque. Available in four NEMA frame sizes (42, 54, 76, 88), SE500 Series motors delivers continuous stall torque from .71 lb-in to 19.12 lb-in and peaks from 3.72 lb-in to 147.81 lb-in..

The SE500 Series motor line includes differential encoder signals, A, B and Index. All models are oil sealed, and 110W and larger motors have brake and tachometer options. They feature very low torque ripple, about .6% of the ripple present in previous generation motors.

The Motion Control Trust Automation SE500 series motors are stocked at the Trust Automation factory for quick delivery on orders of five or less units. Trust Automation servo motors combine standard US style encoders in a compact high quality package. Applications include: Medical imaging, semiconductor processing, packaging and robotics, to name just a few.

FEATURES

  • Standard models stocked for short lead time
  • Rugged high quality industrial construction
  • Differential encoder signals A, B and Index
  • High quality neodymium magnets
  • NEMA IP43 rated
  • CE/UL certified
  • Customization available

APPLICATIONS

  • Medical imaging and research equipment
  • Semiconductor processing equipment
  • Robotics
  • Packaging

TECHNICAL SPECIFICATIONS

ELECTRICAL –

Insulation Grade…………………..F Type, 500 VDC, 10MO

Dielectric Strength………1,500 VAC, 1 min

CONNECTIONS –

SE520-0023 – SE550-0500

Motor and Sensor Connections……………………………….Type: Pigtail, un-terminated Length: 3.6 ft (1.0 M)

Vibration Grade……………………………V10

Excitation System…………………Permanent Magnet

Protection Systems……………………….Fully Enclosed, Self Cooling

Weight…………………………1 lb to 14 lbs (.45 kg to 6.35 kg)

ENVIRONMENTAL –

Maxium Altitude…………………6,560 ft (2000 M)

Temperature (ambient)……………………….Normal operation 0° C to +40° C, Storage -20° C to +65° C

Humidity…………………………Operating: 10% to 70% non-condensing

 

Motor Specifications
Model
Rated Output (Watts)
Cont. Stall Torque (lb-in)
Peak Stall Torque (lb-in)
Cont. Current (A)
Peak Current (A)
Torque Constant (lb-in/A)
Voltage Constant (V/KPRM)
Flange Size (mm)
SE520-0023
23
0.71
3.72
1.8
10
0.42
4.9
42
SE520-0040
40
1.24
6.73
1.0
4.7
1.54
18.2
42
SE520-0060
60
1.77
10.62
1.4
7.6
1.57
18.5
42
SE530-0110
110
3.72
30.09
2.0
18
1.86
21.8
54
SE540-0200
200
6.82
47.80
3.3
25
2.04
24.2
76
SE540-0300
300
12.66
86.74
5.5
40
2.42
28.6
76
SE550-0400
400
15.05
106.21
5.8
40
2.74
32.9
88
SE550-0500
500
19.12
147.81
7.6
62
2.54
30
88

To download Data Sheet – Click HereTo Request Technical Data Sheet – Click Here

Since 1990 Trust Automation has provided Smart Solutions in Motion Control and Affordable Customization of motion related products.

Trust Automation, Inc. has focused on developing and manufacturing the highest quality, high performance components in the motion control market. Our innovative products address the increasing demand for higher performance and simpler machine integration and efficency. When designing products and custom solutions, Trust Automation carefully optimizes the tradeoffs among weight, efficiency, speed, precision, and power. GREENTECH High Efficiency Drives , Traction Controllers, High Efficiency Motors, and High Efficiency Generators are such examples.

Other motion control products available are: Drives, Linear Amplifiers, Controllers and Motors for: Defense, Semiconductor, Industrial Automation, and Medical applications. Additionally, Trust Automation can supply a sub-system or a complete turn-key system.

For additional information contact Sadie Rogers at Trust Automation, 143 Suburban Road, Bldg 100, San Luis Obispo, CA 93401; Tel: 805-544-0761, Fax: 805-544-4621, E-Mail: info@trustautomation.com or visit the Web site at http://www.trustautomation.com

 
 
 

 
 

Motion Control – Maxon’s Brushless EC 22 Sterilizable Motors

Sterilizable Brushless motor up to 100 watts

Maxon motion control EC22 100 Watt Sterilizable Servo Motor

Maxon Logo

Fall River, MA –maxon’s newly improved EC 22 motion control motors are equipped with preloaded ball bearings and latest generation Neodymium permanent magnets. The motors feature low vibration and low noise levels even at high speeds. With their nominal torque of up to 44 mNm, an efficiency of more than 90% and a 25% reduced speed/torque gradient, these are truly performance optimized drives.

All motors are available with Hall sensors or sensorless and with up to four different windings. They can be combined with a variety of standard gearheads and the sterilizable planetary gearhead in a wide range of variations as well as a servo amplifiers and positioning controllers.

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.