Category Archives: Positioning Controller

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw Pitch Stages

motion control - yaw pitch stages

motion control - OES Components

 

 

 

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – High Precision 300 MM Motorized Vertical Lift Stage from OES Features: Stability, High Load Capability, and Low Cost!

Motion Control – Vertical Lift Stage

motion control - vertical lift stage

motion control - OES Components

 

 

Van Nuys, CA – — Motion Control – A vertical lift of 300 mm (11.811 in.), high stability, and low cost are just some of the features of the AT20-300 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES). This high load, 50 kg (110.2 lbs), vertical lift stage can be easily integrated into almost any application. The large 400 mm x 200 mm (15.748 in. x 7.874 in.) stage has a pattern of threaded mounting holes. The rigid box construction of the moving component of the elevator stage travels on six slide rails assuring smooth vertical travel and parallelism of the table and mounting surface at all times, and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy.

Motion Control – Low Cost, High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - linear motion stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle).

Motion Control – ADVANCED Motion Controls 60Amp Micro-Sized FlexPro Servo Drives are available from Electromate!

Motion Control – Micro-Sized Servo Drives!

motion control - micro servo drive


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — ADVANCED Motion Controls has released 7 new micro-sized FlexPro servo drives rated to output 60A continuous. The 60A continuous current rating is 33% higher than previous models for the same size making these our highest power-density servo drives to date. This offering includes PCB Mount, Machine Embedded, and Development Board-factors.

Motion Control – High Precision Motorized Goniometer Stage from OES!

Motion Control – Goniometer Stage

motion control - goniometer stage


Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low-cost solution for the precise measurement of angles or the rotation of an object to a precise angular position.

motion control - stage

 

 

This 160 mm x 160 mm stage with +/- 15o of rotation at speeds to 10o/sec, features a 400:1 worm gear ratio and a resolution of 0.0005 degrees with a 10 micro-step per step stepper motor driver; the stage is also available with a servo motor and optical encoder.

Motion Control – High Precision, XAB Triple-Axis (2 Goniometers and X-Axis) Stage Available from OES!

Motion Control –  Triple-Axis Stage!

motion control - tri-axis stages


motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost solution for the precise measurement of compound angles or the rotation of an object to precise angular positions.

The XAB-050-XX-01 integrates a two-axis Alpha-Beta goniometer on top of a single-axis linear actuator. The Beta-axis has a travel range of +/- 15 degrees with a rotation height of 50 +/- 0.2 mm.

Motion Control – Electromate Recognized with 2021 AHTD Foundation Award!

Motion Control – Electromate 2021 AHTD Foundation Award!

motion control - electromate components


motion control - electromateToronto, Ontario – June 18, 2021 – Electromate received a Foundation Award from the Association for High Technology Distribution (AHTD), recognizing the company’s 25 years of membership and support. This is the first year the Award has been given, honoring a small group of members out of approximately 300 automation solution providers and manufacturers.

The AHTD is dedicated to maximizing the productivity, growth, and enterprise opportunities of its high-tech automation solution provider and manufacturer members. These goals align with Electromate’s commitment to driving innovation, identifying emerging technologies and products, promoting the education of automation and motion control, and fostering its relationships with industry peers.

New! All-in-one Motion Control Programmable Positioning Controller!

Maxon Motion Control Positioning ControllerFall River, MA — Maxon’s expands its program of easy-to-use positioning systems with the addition of the EPOS2 P 24/5. This new master version has a built-in processor and memory which permits standalone operation and independent control of up to 127 other devices through the CANopen bus.

With self-compiled programs, the programmable EPOS2 P 24/5 can autonomously control single and multiple axis systems through the CANbus. In addition it is possible to communicate with a superior process management level for supervising, controlling and data acquisition through CANopen, USB or RS232. Applications are programmed to comply with the IEC 61131-3.

Visit http://www.maxonmotorusa.com for downloads to our graphical user interface (EPOS Studio), sample programs for Windows© DLLs and a library for CAN master units.

For a free catalog use our Catalog Hyper-link above. To speak with our engineering staff call 1-800-865-7540, Fax: 508-677-0530, or email: info@maxonmotorusa.com and say “I saw it in MotionShop.com”, or go to our Web site at: http://www.maxonmotorusa.com.