Category Archives: Motors – Voice Coil – Open Aperture

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

 

motion control - electric cylindermotion control - moticont

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control – Get Zero Cogging and High Throughput from Low Cost Moticont Linear Actuators!

Motion Control – Electric Cylinder!

motion control - electric cylinder


motion control - moticint

 

Van Nuys, CA — Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – Open Aperture Voice Coil Stages Feature 1.20 Inches of Travel and Resolutions of 29.95 and 25.4 Microns!

Motion Control – Open Aperture Voice Coil Stages!

motion control - voice coil stagemotion control - moticont

 

Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up.

Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions

Motion Control – Miniature Rotational Voice Coil Stage

motion control- miniature stage

Forestville, CA, – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.

motion control - equipment solutions

 

 

Motion Control – Linear Voice Coil Motor Tolerates Tilting

Motion Control – Linear Voice Coil Motor Tolerates Tilting

motion control - voice coil motors


motion control - moticontVan Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). 
Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control – Linear Focus Actuator

motion control - linear focus actuator


motion control - miniature components

 

 

 

Forestville, CA, – — The motion control LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.

Motion Control – Compact Direct Drive Linear Actuator Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control –  Linear Actuator features Increased Throughput!
motion control - linear actuators


motion control - moticont

 

Van Nuys, CA – Motion Control – The Compact SDLM-051-070-01-01 Direct Drive Linear Actuator with integrated position and temperature sensors is the latest addition to the patented series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life actuators from Moticont. This direct drive linear Actuator, also referred to as an Electric Cylinder is 2.000 in. (50.9 mm) in diameter and the compact housing length is just 2.750 in (69.9 mm).

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Motion Control – Hollow Core Voice Coil Motor


Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).
motion control - moticont

The hollow core allows for optics, illumination, laser beams, or cables to pass through.

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Motion Control – Miniature Stepper Motor Stage

motion control - miniature components

 

Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Motion Control – Moticont Adds 1 Inch Stroke, Direct Drive Linear Actuator to Their Patented SDLM Series of Electric Cylinders!

Motion Control –  Electric Cylinders!

motion control - electric Cylinder


motion control - moticont
Van Nuys, CA — Motion Control – The SDLM Series of Electric Cylinders from Moticont now includes a 1.0 inch (25.4 mm) stroke actuator in their compact 0.750 in. (19.1 mm) diameter series of linear actuators. The new SDLM-019-095-01-01 actuator features a continuous force of 6.8 oz (1.9 N) and a peak force of 21.6 oz (6.0 N). A precision linear optical quadrature encoder is integrated and protected inside the actuator housing.

Servo Controller for Non-comutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-comutated Devices!

motion control - Voice Coil Motor Controller

SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – Metric Dimensioned Linear Voice Coil Motors are Now Available from Moticont!

Motion Control – Metric Dimensioned Linear Voice Coil Motors!

motion control - voice coil motors

motion control - moticont

 

 

Van Nuys, CA — Motion Control – Moticont has added Metric dimensioned motors to their popular LVCM Series of Linear Voice Coil Actuators! An example is the miniature LVCM-022-013-01M Linear Voice Coil Actuator. At 22.2 mm (0.875 in.) in diameter and at mid-stroke just 20.7 mm (0.81 in.) long, this new metric miniature voice coil actuator has a continuous force of 4.0 N (14.5 oz) and a peak force of 12.7 N (45.7 oz), and features a 6.4 mm (0.25 in.) stroke.

Motion Control – the LFA-3403 Is an Open Aperture Linear Focus Actuator from Equipment Solutions

Motion Control –  Open Apeture Linear Focus Actuator

motion control - linear focus actuator

LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg


motion control - Miniature actuatorsForestville, CA, –
LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control – Hollow Core Voice Coil Motor Has Low Inertia, High Precision available from Moticont!

Motion Control – Hollow Core Voice Coil Motor!

 

motion control - hollow core voice coil actuator


Van Nuys, CA — Motion Control – Moticont introduces an open aperture (hollow core) voice coil or moving coil linear motor from Moticont, the HVCM-051-025-013-01. Featuring an open aperture of 0.50 in. (12.7 mm) this low cost, clean room friendly non-commutated motor is available off-the-shelf. The light weight and low inertia moving coil of the linear actuator demonstrates:

High acceleration/deceleration, high speed, zero cogging, and by connecting directly to the load, zero backlash.

motion control - moticont

The HVCM-051-025-013-01 Linear actuator has a hollow core that allows for optics, illumination, laser beams, or cables to pass through, additionally, it has a continuous force rating of 5.3 lbs (23.7 N) and a peak force of 16.9 lbs (74.8 N) at a 10% duty cycle. This compact voice coil actuator measuring just 2.000 in. (50.8 mm) dia. X 1.00 in. (25.4 mm) housing length with a 0.50 in. (12.7 mm) stroke is ideal for applications such as: Medical diagnostics and testing, laser beam steering, wafer handling, laser cutting and welding, dynamic vibration absorption, optical focusing, scanning, assembly, and positioning applications.

Two 10-32 UNF-2B x 0.25 in. (6.4 mm) deep threaded mounting holes on 1.000 in. (25.4 mm) centers in the housing and coil allows for flexible and easy integration into new and existing applications. When used in closed loop applications with an adequate optional position sensor, resolutions of less then 1 micron are achievable for millions of cycles. If a longer stroke, higher force, a smaller foot print, or customized mounting is required, consult Moticont’s team of engineers. All of Moticont’s voice coil linear actuators are available as complete plug-and-play systems, including: Position sensor, servo driver, power supply, and if required with a linear position sensor.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont

 

 

Motion Control – LFA-3404 Linear Focus Actuator from Equipment Solutions

Equipment Solutions

Forestville, CA –The motion control LFA-3404 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The motion control LFA-3404 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.   

The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques. By design, the LFA-3404 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation.  Product manufacturing tolerances are closely monitored so that both lateral and angular displacements about the motion axis are as small as possible.

Specifications

Motor Force Constant

Interface Drawings

 

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm). The hollow core allows for optics, illumination, laser beams, or cables to pass through. With a 0.50 in. (12.7 mm) stroke length, a continuous force rating of 4.8 lbs (21.3 N) and a peak force of 15.15 lbs (67.4 N) at a 10% duty cycle, this compact voice coil motor measuring just 2.000 in. (50.8 mm) dia. X 1.00 in. (25.4 mm) housing length, is ideal for applications such as: Positioning, medical diagnostics and testing, laser beam steering, dynamic vibration absorption, optical focusing, laser cutting & welding, scanning, assembly, and wafer handling.

Two 10-32 UNF-2B x 0.25 in. (6.4 mm) deep threaded mounting holes on 1.000 in. (25.4 mm) centers in the housing and coil makes for flexible and easy integration into new and existing applications. Low inertia, high acceleration, high speed, and zero cogging are benefits of this moving coil or voice coil linear motor. When used in closed loop applications with an optional position sensor, resolutions of less then 1 micron are achievable for millions of cycles. If a longer stroke, higher force, a smaller foot print, or customized mounting is required consult Moticont’s team of engineers. All of Moticont’s voice coil motors are available as complete plug-and-play systems, including, position sensor, controller, amplifier, power supply, and if required with a linear slide.

Is there a need for a larger diameter motor, one with longer travel, or more force? There are several series of Moticont’s Voice Coil motors based on diameter of the motor, length of stroke, force and solid core or hollow core to select from. To find the right motor for your application go to http://moticont.com/voice-coil-motor.htm and http://moticont.com/hollow-voice-coil-motor.htm.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Low Inertia, High Precision, Hollow Core Voice Coil Motors from Moticont!

Motion Control Components - Moticont Hollow Core Voice Coil Motors

MotiCont-Logo

Van Nuys, CA – Motion Control Components -Low inertia hollow core voice coil or moving coil linear motors from Moticont feature high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. The cleanroom friendly, non-commutated motors are available in 23 off-the-shelf standard sizes, Moticont hollow core voice coil linear motors have open apertures of 0.125 in. (3.2 mm) to 2.000 in. (50.8 mm). The linear motor’s hollow core allows for optics, illumination, laser beams, or cables to pass through. For easy integration into new and existing applications these linear voice coil motors are available in five standard outside diameters of 0.625 in. (15.9 mm) up to 3.750 in. (95.3 mm). Stroke lengths are from 0.125 in (3.2 mm) to 2.500 in. (63.5 mm), the continuous force ratings are from 5.0 oz (1.4 N) to 16.3 lbs (72.4 N), and peak forces are from 15.7 oz. (4.4 N) to 51.5 lbs. (228.9 N) at a 10% duty cycle. Applications include: Positioning, medical diagnostics and testing, laser beam steering, dynamic vibration absorption, optical focusing, laser cutting & welding, scanning, assembly, and wafer handling.

Low inertia, high acceleration, high speed, and zero cogging, are the benefits of moving coil or voice coil linear motors. When used in a closed loop applications with an optional position sensor, resolutions of less then 1 micron are achievable, for millions of cycles. If longer than standard strokes, higher forces, or customized mounting are required consult Moticont’s team of engineers. All of Moticont’s voice coil motors are available as complete plug-and-play systems, including, position sensor, controller, amplifier, power supply, and if required with a linear slide.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos