Category Archives: Motors – Miniature

Motion Control Application – Lab automation is getting even smaller

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

moption control - miniature motors

motion control - maxon

 

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

 

motion control - electric cylindermotion control - moticont

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control – The first e-road bikes and e-MTBs with the lightweight maxon BIKEDRIVE AIR have arrived!

Motion Control – e-road bikes and e-MTBs!

Italian premium road bike manufacturer, Cipollini and Swiss bike manufacturer, TRANSALPES launch their new lightweight e-bikes with the maxon BIKEDRIVE AIR

motion control - application


motion control - maxon motorsTaunton, MA — Motion Control Products – The Cipollini Flusso is a performance e-road bike that weighs only 10.7 kg. With a weight of less than 16 kg, the TRANSALPES E1 sets standards in the electrified trail and enduro segment. Both e-bikes put a natural feel at the center of the riding experience.

There is an emerging trend in the e-bike market towards lightweight systems that are almost indistinguishable from standard bicycles. This development is supported by smaller, more powerful motors and improved battery technologies. “Integration is the key word,” says Michele Tittonel, R&D Coordinator at Cipollini. “The second generation of e-race bikes will be powered by electric motors fully integrated into the bike design and complemented with high-end components.”

Cipollini set out to develop one of the lightest e-race bikes in the world without compromising reliability and duration of assistance. Now the Italian bike manufacturer is introducing the new Flusso, which weighs just 10.7 kg

The Cipollini Flusso is equipped with maxon’s BIKEDRIVE Air system, which weighs just 3.5 kilograms including the battery. At its heart is a mid-mounted motor that delivers 30 Nm of torque. Thanks to a special free-wheel technology it’s easy to pedal even without electric assistance. Michele Tittonel says, “The natural feeling of riding is absolutely crucial; after all, physical effort should remain part of the experience.”

motion control - maxon application

Integration of the drive is also a top priority for the Swiss bike manufacturer TRANSALPES. “With the BIKEDRIVE AIR system from maxon, we want to build perhaps the lightest e-bike for demanding mountain bikers,” as co-owner Michel Juhasz explains. “The new TRANSALPES E1 rides as naturally as a mountain bike without a motor.” TRANSALPES’ lightest e-bike, with a carbon frame, weighs less than 16 kg.

The Cipollini e-road bikes and TRANSALPES e-MTBs can be configured and pre-ordered on the manufacturers’ websites.

For additional information, please visit: www.maxonbikedrive.com or contact us at info.us@maxongroup.com or 508-677-0520.

Also see Maxon-Light-Invisible-E-bike-System.shtml

About Maxon

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon’s trade show experience goes virtual
motion control tradeshow

This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.

If you prefer watching an entertaining video introducing all the latest products maxon brought to the market this year, you will find it here: https://youtu.be/Jtw7Hwxbdr4 a> Have fun watching! For more information please contact us at info.us@maxongroup.com or 508-677-0520.

For Information on Maxon’s Virtual Trade Show CLICK HERE

motion control - miniature components


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

View 2021/2022 Maxon Catalog

 

motion control - maxon motors

 

Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions

Motion Control – Miniature Rotational Voice Coil Stage

motion control- miniature stage

Forestville, CA, – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.

motion control - equipment solutions

 

 

Motion Control – From soaring heights: Camera stabilization with maxon drives!

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

motion control - Application


motion control - maxon motors

 

Taunton, MA — Motion Control Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Linear Voice Coil Motor Tolerates Tilting

Motion Control – Linear Voice Coil Motor Tolerates Tilting

motion control - voice coil motors


motion control - moticontVan Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). 
Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

Motion Control – Stage Features 200 Nanometers Repeatability!

motion cotrol - miniature xy stage
motion control - miniature components

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – Maxon Expands its range of configurable drives!

Motion Control – Miniature Configurable Drives!

Maxon is once again expanding its range of configurable drives with more brushless DC motors, gearheads, and encoders from the ECX series.


motion control - maxon

 

 

Taunton, MA — Motion Control Products – The ECX series is growing with the addition of the maxon ECX Speed 4. This tiny powerhouse with a diameter of only 4 millimeters is designed for use in medical technology. The brushless DC motors are available in 2 versions: M (medium) and L (long) and can reach speeds of up to 50,000 rpm. They can be combined with the new GPX 4 C gearheads, which are available as two, three, or four-stage versions. With the GPX planetary gearheads, the pressure angle of the toothing has been optimized to achieve longer uptimes.

Motion Control – Maxon’s UAV propulsion system is Safe, Efficient and Ready for Take-off!

Motion Control – UAV Propulsion System!

Maxon BLDC motors were specifically designed for extreme durability and maximum reliability in professional UAVs.

motion control - - uav propulsion system


motion control - maxon motors

 

 

Taunton, MA — Motion Control Products – maxon actively supports UAV manufacturers with their ambitious designs, up to certification. Our UAV product portfolio offers matched combinations of motors, ESCs and propellers, for optimized propulsion systems providing maximum efficiency and reliability. Hence, operational safety and flight time are maximized, and costs of ownership dramatically cut down

motion control - EC69 specifications

Motion Control High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control – Linear Focus Actuator

motion control - linear focus actuator


motion control - miniature components

 

 

 

Forestville, CA, – — The motion control LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.

Motion Control – 1 Inch Diameter Open Aperture Voice Coil Motor Has 1 Inch Stroke and High Force-to-Size Ratio!

Motion Control – Open Aperture Voice Coil Motor!

motion control - voice coil motor

motion control - moticont

 

 

Van Nuys, CA — The 1.00 inch body diameter open aperture voice coil linear motor, the HVCM-025-038-003-02, featuring an open aperture and high force-to-size ratio is introduced by Moticont. This small brushless servo motor is capable of high acceleration, deceleration, high speed, zero cogging, and zero backlash when connected directly to a load. All HVCM open aperture brushless servo motors are extremely quiet, clean room compliant, and capable of high precision when used in closed loop applications. This DC voice coil servo motor has a continuous force rating of 1.0 lbs (4.6 N) and a peak force of 3.2 lbs (14.4 N) at a 10% duty cycle.

Motion Control Application- Intra-aortic pump powered by miniature brushless DC motors provides heart failure patients an aid to help hearts rest and heal!

Motion Control – Application – Heart Pump
The Maxon EC 6 motor brushless DC motor is the second smallest drive in the maxon family.

motion control - maxon application

 


motion control - maxon

 

Fall River, MA — Motion Control Components Application – Chronic heart failure patients draw hope from a new technology. A team of life science entrepreneurs in Houston, Texas has developed the first catheter-deployed circulatory assist device intended for long-term use. Procyrion, Inc.’s Aortix™ provides a minimally invasive treatment option for the more than two million chronic heart failure patients in the USA alone who are too sick for medication. This pre-clinical cardiologist tool dramatically reduces risks associated with circulatory support devices and enables treatment of younger, healthier patients before progressive damage occurs.

Motion Control – Frameless BLDC motor with matching encoder for a wide range of robotics applications!

Motion Control – Frameless BLDC Motor

motion control - frameless motor


motion control - maxonTaunton, MA — Motion Control Products – maxon presents a new frameless BLDC motor with matching encoder that really comes into its own in dynamic applications. This heralds the arrival on the market of several solutions for design engineers grappling with tight spaces.

Innovative motor concepts are the answer to growing market requirements for dynamic response, compactness, and power density. With the EC frameless DT, maxon presents a solution that really packs a punch. The DT50 is the precursor of a new product family developed specifically for dynamic movements. The brushless motor with its frameless concept can be easily integrated into a wide range of applications by design engineers.

Motion Control – Miniature PVS 30.5 Parallelogram Voice Coil Stage from Equipment Solutions!

Motion Control – Miniature Parallelogram Voice Coil Stage!

motion control - miniature stages


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexture guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.

Motion Control – New Galil DMC-21×5 Multi Axis Motion Controller is Available from Electromate!

Motion Control – Multi Axis Motion Controller

motion control - multi-axis controller

Vaughan, Ontario, Canada — Motion Control Components — The DMC-21×5 is the latest addition to the Econo family and is an easy upgrade path from the long running DMC-21×3 series. The DMC-21×5 utilizes nearly all of the same peripherals as the DMC-21×3 controller, making the transition simple.

motion control - electromate- robotics

The main difference between the DMC-21×5 and its predecessor is a state of the art ARM based processor that places its communication, command processing and memory capabilities on par with Galil’s line of current generation motion controllers, while still remaining at the Econo Series price of the DMC-21×3.

Motion Control – maxon launches light and invisible e-bike system!

Motion Control – Light and Lnvisible e-bike system!

Motion Control – First, maxon’s drives flew on Mars in the NASA helicopter – now they’re letting bike riders lift off.

motion control - invisible electric bike system


motion control - maxon motors

 

 

Taunton, MA — Motion Control – After several years of development, the company presents the BIKEDRIVE Air – a light and invisible e-bike system consisting of a mid-mounted motor, integrated battery, and control element. It can be used to build extremely lightweight racing, gravel, urban, and mountain bikes. The first bicycles made by maxon customers will be introduced to the market this year.

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Motion Control – Hollow Core Voice Coil Motor


Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).
motion control - moticont

The hollow core allows for optics, illumination, laser beams, or cables to pass through.

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Motion Control – Miniature Stepper Motor Stage

motion control - miniature components

 

Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Motion Control – Electromate extends its product portfolio to include Robots from Mecademic!

Motion Control – Electromate adds Robots from Mecademic!

motion control - electromate robotics

Electromate’s new partnership with Mecademic will expand its reach to end users and manufacturers needing ultra compact and precise industrial robots across Canada.

 

 

 

TORONTO, Ontario — Electromate Inc., a leading Canadian Distributor of Precision Robotic & Mechatronic Solutions, today announced a partnership with Mecademic, a Montreal based premier manufacturer of the world’s smallest, most compact, and precise industrial robots.

Motion Control – Moticont Adds 1 Inch Stroke, Direct Drive Linear Actuator to Their Patented SDLM Series of Electric Cylinders!

Motion Control –  Electric Cylinders!

motion control - electric Cylinder


motion control - moticont
Van Nuys, CA — Motion Control – The SDLM Series of Electric Cylinders from Moticont now includes a 1.0 inch (25.4 mm) stroke actuator in their compact 0.750 in. (19.1 mm) diameter series of linear actuators. The new SDLM-019-095-01-01 actuator features a continuous force of 6.8 oz (1.9 N) and a peak force of 21.6 oz (6.0 N). A precision linear optical quadrature encoder is integrated and protected inside the actuator housing.