Category Archives: Motion Control System

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

 

motion control - electric cylindermotion control - moticont

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control Application – Driver assist systems can help save lives by alerting driver of potential danger!

Motion Control – Application – Driver Assist Systems Help Save Lives!

motion control - application - brushed motors

Maxon A-max 16 brushed DC motor – This drive with a diameter of 16 millimeters (precious metal brushes, 2 Watt) was developed for use with an eccentric weight and a specified bearing.

Fall River, MA — The majority of traffic accidents are caused by human error. In the future, computer-controlled cars will significantly reduce the number of such accidents. Driver assist systems, such as adaptive cruise control (ACC), brake assist systems, or lane departure warning systems (LDW), can save lives. Lane departure warning systems warn the driver if the vehicle is drifting out of its lane.

motion control - maxon
The LDW determines the vehicle’s position in the lane with the use of various optical sensor systems and computers. If the car is in danger of drifting out of the lane, the system activates an electric motor in the steering wheel that causes the wheel to vibrate, warning the driver.

Motion Control – Increase Machine Control, Motion Capabilities, & EtherCAT System Support with Kollmorgen Automation Suite™!

Get the Kollmorgen Automation Suite™ Available from Electromate!

Electromate-Kollmorgen-Automation-Suite

 

Motion Control - Electromate-Logo

 

Updates deliver twice the control performance of prior versions, while enabling system-wide third party product configuration to be handled by the integrator

 

Vaughan, Ontario, Canada — Motion Control –Kollmorgen introduces Kollmorgen Automation Suite™ (KAS) software version 2.8 and AKD servo drive platform firmware version 1.12. The additions include a new higher performance version of the AKD PDMM, enhancements to the coordinated motion programming blocks and additions to the EtherCAT configuration tool. This enables OEM’s who utilize Kollmorgen’s automation and drive systems to deliver differentiated machines with greater system design flexibility, performance capability, and ease-of-use.

The flagship enhancement to this version of Kollmorgen Automation Suite and AKD PDMM is a higher power version of the integrated Multiaxis controller/drive dubbed ‘M1.’ The M1 doubles the control performance of the standard PDMM and allows for more axes at faster update rates. It can control 30+ axes of motion, where the standard PDMM is equipped to control up to 16-axes. Alternatively, when compared with the standard PDMM in an application with the same amount of axes, this means most applications will be able to run twice as fast based on system load testing, which is particularly helpful in synchronized and coordinated systems that rely on microsecond timing,” says Reid Hunt, Drives and Control Products Manager.

For material forming applications this means more accurate path motion, which is critical for accurate cutting and bending. For packaging, food, and converting applications, it means more accurate web tracking, sealing, gluing, cutting, and slitting. All of this is critical for today’s more complex consumer packaging. With coordinated motion blocks and enhanced capabilities, such as three-axis coordinated linear motion as standard, KAS is an ideal solution for more applications than ever before. A template project complete with preconfigured motion blocks, automation code and GUI code helps users get started with coordinated motion. This eliminates the need to control the timing and position of individual axes. It also enables the programmer to command motion in free space and just specify the end position and path.

“It is common to pair a PC running some front-end application code with an automation controller to handle the synchronization of trajectories and machine automation,” explains Hunt. “UDP is a simple communication protocol that allows for the fast transit of data between devices. Multiple KAS controllers can also be linked together using these communications protocols for a modular machine approach.”

CLICK HERE to view the specification on the Kollmorgen AKD PDMM™ Integrated Servo Drive and Automation Controller.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

 

One to Three-axis Stand-alone Motion Control Systems for Any Combination of Servos or Steppers!

Low Cost, Plug-and-Play, One to Three-axis Stand-alone Motion Control Systems for Any Combination of Servos or Steppers from OES!

OES -Sonata Controller, Keypad, Joystick and Trackball

OES Logo

Van Nuys, CA -Motion Control System – The Sonata series of motion control systems from Optimal Engineering Systems (OES) is a stand-alone, easy-to-use, plug-and-play, cost effective solution for motion control applications. The systems in this series support up to 3 axes of motion, in any combination of steppers, DC servo and brushless servo motors, and voice coil motors.

Each system includes the power supplies, the motion controller, the micro-stepper and/or servo motor drivers. The operator interface terminal makes the system totally stand-alone and allows the operator to interact with the motion controller without needing an additional PC. The system can also be operated using an analog joystick or a trackball. The speed of the motor is proportional to the tilt angle of the joystick or the rotational speed of the trackball. Using the 4-line LCD and 32 button keypad, the user can enter motion parameters and select different modes of operation.

Power supply options include: 115 or 230 VAC (standard) and 12 VDC to 80 VDC (Optional). The power supply will be selected to meet the customer’s requirements. The available wattages are 80 W, 160 W, 240W, 400 W and 500 W. Options available for these Plug-and-Play systems include, motors, encoders, drivers, and cabling. Measuring just 10.0 in. (265 mm) x 10.8 in. (265 mm) x 4.875 in. (124 mm), or in a 19 inch (482.6 mm) rack mount enclosure, the Sonata motion control systems are easy to install.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website athttp://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos