Category Archives: Linear Stage

Motion Control – Low Profile XYZ Force Positioning System from H2W Technologies!

Motion Control – Low Profile XYZ Positioning Stage

motion control - linear motion stage

Santa Clarita, CA —– Motion Control – This compact closed loop system was designed to satisfy the customers dual feedback requirements. This allows for simultaneous position and force monitoring which can adjust accordingly in three axis of motion (XYZ). It was designed to operate in an inverted orientation. This low profile XYZ-Force positioning stage design is comprised of a SRS-002-003/002-003-01-XY single rail positioning stage (horizontal XY-axis) with a mounted VMS06-008-LB-01 voice coil positioning stage (vertical Z-axis). The bottom axis use brushless linear motors that generate a continuous/peak force of 3.1 lbs [13.8 N]/9.4 lbs [41.8 N] (bottom axis), 3.1 lbs [13.8 N]/9.4 lbs [41.8 N] (top axis), with a total stroke length of 1.8 in [45.7 mm] (bottom axis), 1.8 in [45.7 mm] (top axis).

motion control - H2W Technologies

The top axis is able to directly mount to the moving bottom axis motor. This helps reduce the overall height and moving mass of the system. The non-contact 1.0-micron resolution encoder allows for precise positioning. It is guided by a rigid recirculating ball linear bearing. It has end-of-travel bumper stops. The vertical axis voice coil motor generates a continuous/peak force of 1.12 lbs [5.0 N]/3.36 lbs [15.0 N] with a total stroke length of 0.60 in [15.2 mm]. The 1.0-micron resolution encoder allows for precise positioning. It comes supplied with a sliding contact linear bearing. The motor shaft is the moving part of the assembly so that there are no moving (flexing) cables in the system. This also reduces the moving mass of the system. The 6-axis force transducer provides force and torque feedback for XYZ-axis of motion.

Features:

  • Compact size
  • Low Profile
  • Three axis motion control
  • Dual feedback

 

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

 

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://LinearmotionBlogger.com

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

H2W Technologies YouTube Videos

H2W Technologies Blog

motion control - H2W Technologies

 

Motion Control – NEW! High Speed Integrated Bearing and Drive System Features +/- 5 Microm Repeatability!

Motion Control – High Speed Integrated Bearing and Drive System

motion control - high speed drive system

E. Longmeadow, MA –Motion Control – LM76 is the Exclusive North American Distributor of a new high speed integrated bearing and drive system featuring +/- 5 micron repeatability, and zero backlash! This new X-Axis BE125-10 Open Screw Drive System sets new standards for: Length of travel, speed, and precision for Cartesian Robots (robots that move in X,Y and Z axes according to Cartesian Coordinates also know as rectangular coordinates) and single axis linear stages!

motion control - lm76

The new X-Axis BE125-10 Open Screw Drive System is a compact linear stage measuring 125 mm (4.921 in.) wide x 86 mm (3.386 in.) high x 4391 mm (172.874 in.) long and can handle dynamic loads to 500 kg (1102 lbs). The standard stroke length is 4000 mm (157.480 in.) and custom stroke lengths to 10 m (32.8 ft) can be specified.

This new drive system consists of a precision ground open screw and two pre-loaded radial ball bearings additionally the open screw drive system is supported by bearings spaced every 250 mm that prevent screws as long as 10 m from whipping even at 5000 rpms. This is in contrast to a closed screw system (ball screw and nut) which are more limited as to length of travel and rpms.

Shafting options include: Solid and hollow Class L RC60, 300 series stainless steel in lengths to 12 feet. FDA/USDA/3A-Dairy compliant, shafting features: Excellent corrosion and chemical resistance, custom machining to print, pre-drilling and assembly.The guide system consists of two parallel shafts and 8 preloaded radial bearings. In addition to smooth motion, low vibration, low noise (less than 68db at 3000 rpm), and minimal heat generation the BE125-10 Open Screw Drive System is capable of travel speed up to 1.7 m/sec (5.5 ft/sec). and pitch and yaw accuracy over 4000 mm (157.480 in.) of travel is just +/- 0.02 mm (0.00079 in).

Get the high precision X Axis BE125-10 Open Screw Drive System for higher throughput, and guaranteed longer life in: Pick-and-place, sorting, packaging, assembly, machining, and testing applications. This complete linear stage and drive system is easily integrated in new and existing applications.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76  – Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

See this and other Motion Control Components from LM76 featured on:

The LM76 Blog

LM76 Catalogs

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - lm76

 

 

Motion Control – Linear Focus Actuator Features, 20 mm Clear Optical Path, <50 nanometer Repeatability, and <3 miliseconds Response Time!

Motion Control – Linear Focus Actuator

Forestville, CA –The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

motion control - equipment solutions

The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds. This high force, low noise voice coil motor is typically configured with an analog position feedback sensor and can be optionally equipped with a 1um resolution digital quadrature feedback element.

Specifications

Clear aperture (option) 20 mm
Range of Motion 10 mm
Positioning Resolution 50nm (analog), 1mm (digital)
Peak Force 30 lbs  (for 10 sec.)
Max Continuous Force 4.5 lbs  (20 N)
Motor Constant 0.6 lbs/Amp (2.7 N/Amp)
Coil Resistance 1.5 ohms
Coil Inductance 100 uH
Travel Non-Straightness <1 um   (Flexure)
Flexure Parasitic Rotation 0.1 degrees per mm travel
Dimension 75 X 75 X 75 mm
Total Mass 1.7 kg
Moving Mass 50 g
cable length (stock) 28” (700 mm)

 

An important feature of this product is it’s innovative tubular architecture. This allows the 20 mm clear optical path to go directly through the middle of the motor. The patented dual ‘Flexures system’ has zero stiction/friction. For mounting optics a standard C-mount is provided, or an optional 12.7mm diameter lens socket. The C-mount provides options for adapters to common microscope objectives like DIN or M25 or M26. The LFA-2010 Linear Focus Actuator is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, biotechnology, and semiconductor test equipment.

motion control- linear focus actuator

The LFA-2010 Linear Focus Actuator can be supplied “Plug-and-Play,” with the SCA814 Servo Controlled Amplifier, a matching power supply, and necessary cabling for easy integration into new and existing applications.

LFA-2010 Brochure

LFA-2010 Interfacing and User Manual

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - Miniature actuators

 

 

Motion Control – High Speed, Closed Loop Linear Motion Positioning Stage from H2W Technologies!

Motion Control – High Speed Positioning Stage

motion control - linear stage

motion control - H2W Technologies

Santa Clarita, CA —– Motion Control – The SRS-006-06-050-01-EX single rail positioning stage is ideal for high-speed closed loop positioning applications that require both short and long travel distances. It uses a brushless linear motor to generate a continuous/peak force of 50 lbs [220 N]/150 lbs [660 N] with a total stroke length of 5.75 in [146 mm]. The non-contact 1 micron resolution encoder allows for precise position control. It is guided by a pair of recirculating ball linear bearings on a precision linear bearing rail.

The entire stage is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. There are also provisions that allow customer cables to be routed within the cable carrier. It has end-of-travel rubber bumper stops. A home positioning sensor, end-of-travel-sensors, and custom mounting holes on the moving table are available upon request.

Features:

  • Single extrusion lengths up to 6 meters long allowing for long strokes
  • Ability to run multiple independently controlled motor heads on a single magnet track
  • Custom strokes, forces, and feedback resolution configurations available
  • Fully integrated programmable motion control electronics to allow for closed loop position control are available

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://LinearmotionBlogger.com

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

H2W YouTube Channel

H2W Technologies Blog

motion control- h2w

 

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage From Equipment Solutions Is a Complete Positioning System!

Motion Contol – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.


The PVS-5.5 Parallelogram Voice Coil Stage features a high force, frictionless voice coil motor and infinite life flexure system that provides superior responsiveness and accuracy (positioning resolution 75 nm) over conventional leadscrew or belt drives and produces the least amount of electrical noise of any motor currently available. The stage can be mounted in a horizontal or vertical position and for easy integration tapped and clearance holes are provided in the base.

motion control - parallelogram stage

An integral sub-micron linear displacement sensor with high bandwidth and low noise for high responsiveness and precise movements featuring frictionless optical technology completes this positioning system. This cleanroom compatible positioning system is low cost and uses ±12 V to ±24 V @ 1 A. The PVS-5.5 Parallelogram Voice Coil Stage is available with the Equipment Solutions, Inc. SCA814 Servo Controlled Amplifier, and to aid integration into a new or existing application CAD drawings are available on the Equipment Solutions, Inc, Website at http://www.equipsolutions.com/products/linear-stages/pvs-5-5-parallelogram-voice-coil-stage

 

motion control - parallelogram specifications

motion control - Miniature stage interface dwg

Download Brochure

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Follow Equipment Solutions on Twitter

Follow Equipment Solutions on Facebook

Go to the Equipment Solutions Blog

motion control - equipment solutions

 

Motion Control – XZ-Axis Motorized Linear Positioning Stages feature 1 Micron Repeatability from Optimal Engineering Systems, Inc. (OES)!

Motion Control – XZ-Axis  Positioning Stages

motion control - positioning stage

 


motion control - OESThe high precision 1 mm per turn lead screws and crossed roller bearings are used in these black anodized stages. They are deal for: Sampling, assembly, sorting, testing, laser drilling and machining, and positioning in lab and manufacturing environments.Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has added a new series of 15 mm, 30 mm, 50 mm, and 75 mm Linear Motion Positioning Stages to their broad selection of precision motion control components. Each of these motorized XZ-Axis Linear Positioning Stages features 1 micron repeatability and 10 micron positional accuracy. Both the X-axis (horizontal axis) and the Z-axis (vertical axis) have the travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm and even longer to meet your application requirements.

The XZ-Axis linear stages are available with either stepper motors with knobs for manual adjustment which can be replaced with optical encoders for position verification. The stages are also available with servo motors and encoders for closed loop operation and higher operating speeds.

These XZ-Axis Motorized Linear Positioning Stages are compatible with the OES (Optimal Engineering Systems) line of motion controllers and are available as a complete plug-and-play system. Please consult the OES sales team for longer travel lengths or if custom mounting configurations are required.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com


See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

OES is on Facebook

OES is on Twitter

OES Videos

Motion Control – Compact, Open Aperture Voice Coil Stages Features 1 Micron and 30 Micron Positioning Resolutions!

Motion Control – Hollow Core Voice Coil Stage

motion control voice coil stage

Van Nuys, CA – Motion Control – The compact open aperture HCDS-051-032-013-01-B1-30 and the HCDS-051-032-013-01-B1-01 Voice Coil Stages from Moticont have a foot print of just 2.000 in. (50.8 mm) wide by 5.000 in (127.0 mm) long and feature positioning resolutions of 30 microns and just 1 micron respectively. These precision stages allow the user to select the level of precision needed for an application.

motion control - moticont

The 1 micron resolution HCDS-051-032-013-01-B1-01 Voice Coil Stage features cross roller linear bearings whereas the 30 micron HCDS-051-032-013-01-B1-30 Voice Coil Stage uses linear ball bearings. Each of these stages has a 0.97 in. (24.6 mm) range of motion with 6.3 lb. (28.2 N) of continuous force and 20.0 lb (89.9 N) peak force. These brushless, clean, quiet, efficient, low inertia, high acceleration, zero cogging and high speed voice coil driven stages have a built-in home switch for accurate initialization. As the coil is fixed and the magnetic assembly moves, there are no moving electrical components to fail. Designed for closed loop servo operation an integral quadrature optical encoder with differential outputs is included..

The stages’ 1.509 in (38.3 mm) x 2.000 in. (50.8 mm) tables are equipped with 4 8-32UNC-28 mounting holes. Pre-drilled and counter-bored mounting holes in the base of the stages and a plug -and-play wired connector allows for easy integration into new or existing applications. These black anodized voice coil stages with a 0.500 in (12.7 mm) clear aperture are ideal for: Laser drilling and machining, optical focusing, testing, laser steering, mirror positioning, scanning, oscillation, switching, as well as precision applications in industrial, medical, metrology, and research fields.

The HCDS-051-032-013-01-B1-01 and HCDS-051-032-013-01-B1-30, Voice Coil stages are also available in XY or XYZ configurations, and can also be ordered as a complete plug-and-play system with a controller. Please consult our engineers if your application requires others parameters such as: Range of motion, continuous or peak force, and multi axis configurations.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont

 

 

Motion Control – Linear Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Accelation!

Motion Control – Miniature Stage

motion control - miniature stage

Forestville, CA – Motion Control – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

motion control - equipment solutions

The VCS-1010D motion control linear position stage (pictured) features a 10 mm clear aperture and a 1 μm resolution digital position sensor, with differential quadrature outputs and a center index pulse. The highly responsive, frictionless voice coil motor has been optimized to keep the moving mass as low as possible for the fastest response times, and it has the lowest electrical noise of any motor type.

motion control miniature satge with lens

These compact 76 X 41 X 38 millimeter motion control stages weigh only 255 grams and can be operated horizontally or vertically. Multiple sets of mounting holes allow for easy integration into new or existing applications. These versatile VCS-10 linear positioning stages can be custom configured to meet the users requirements. As an example, is the custom VCS-1010D (pictured right) with a 6mm lens and manual cross-axis adjustments.

Equipment Solutions is a leading authority in the field of voice coil motion control. Recognizing that exceptional performance can only be achieved through a system level approach, ESI also has extensive servo electronics expertise. Equipment Solutions motors and actuators are used in markets ranging from applications where our actuators delicately guide a laser beam over an eye as part of a vision enhancement procedure to military hardware that is battlefield certified, and everything in between.

motion control- miniature stage specifications

motion control miniature stage line drawings

With a time-to-market as short as four weeks, Equipment Solutions has maintained innovative, high quality products. Equipment Solutions, never loses sight of the value of listening very carefully to client input, nurturing a cooperative working relationship, understanding the big picture but never losing sight of the small details that describe it, and perhaps most importantly, following through with after delivery support.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Facebook

Twitter

Equipment Solutions Blog

motion control - equipment solutions

 

 

Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!

Motion Control – XYZ Axis Voice Coil Actuator

motion control - 3 axis voice coil stage

Van Nuys, CA – Moticont has released a new three axis XYZ linear actuator the XYZ-10. The X and Y axes of the actuator each has a 0.97 in. (24.6 mm) of travel and the Z axis has a stroke of 0.500 in. (12.7 mm). The high speed, high acceleration, zero cogging, brushless voice coil motors provides 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force.

motion control - moticont

The VCLM-XYZ-51-032-025-070 three axis linear actuator stage features resolutions of 1.0 micron for the X and Y axes. The Z axis has a resolution of 1.25 microns. All axes are equipped with a HOME switch. The stationary axis has a footprint of only 2.00 in. x 5.00 in. (50.8 mm x127.0 mm) with convenient mounting holes and an internal thread on the non-rotating shaft of the Z axis actuator. This XYZ actuator can easily be integrated into new and existing applications, and is ideal for: Assembly, pick-and-place, testing, inspection, sampling, and probing applications, especially in confined spaces.

Moticont can quickly provide the XYZ-10 three axis linear actuator as an easy to install complete plug-and-play linear motion system including the servo controller.

About Moticont – Moticont is a manufacturer of motion control products. Our product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont