Category Archives: Linear Shafting – Custom

Motion Control – Linear Guide Systems Move 1200 Lb. Loads At Speeds Of 30 Feet Per-Second!

Motion Control – High Speed Block and Rail Sets
motion control - linear block & rail

motion control - linear motion products

 

 

E. Longmeadow, MA – Motion Control – Two new series of high speed, low cost, compact linear guide systems called, “Speed Guides,TM” have been introduced by LM76. The Speed Demon OSG type and Speed Demon SG type linear guide systems are designed for speeds up to 10 m/sec. (32.8 ft/sec.), accelerations to 50 m/sec.2 and loads up to 5600 N. (1259 lbs.). These quiet, low profile guide systems are ideal for: High speed assembly and sorting operations, pick and place robots, industrial, office, and packaging machines, vacuum applications, and medical equipment (including patient care devices).

Motion Control – The Engineering Edge – Jet Rail Linear Roller Blocks – Bearing Specifications and Loading Instructions

Motion Control – the Engineering Edge – Jet Rail
motion control - engineering edge

motion control - jet rail linear bearings

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks with Si3N4 Silicon Nitride Hybrid Bearings, Set New Standard for Performance and Hygienics!

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks

motion control usda certified flange blocks
motion control - linear motion products

 

 

E. Longmeadow, MA – Motion Control – FDA/USDA Certified, two, three and four post, Stand-Off Bearing Flange Blocks are setting a new standard for performance and Hygienics. These new Stand-off bearing flange blocks now available from LM76 reduce the surface area where mold and bacteria can thrive, even from the most through sanitizing operations. Long life Hybrid Stainless Steel Si3N4 Silicon Nitride Ceramic Ball Bearings in Stainless Steel bearing blocks are coated with a smooth non-water absorbing polyamide coating certified by EHEDG, USDA, and 3-A.

Motion Control – Deep Groove Stainless/Ceramic Hybrid Si3N4 Silicon Nitride Radial Ball Bearings for High Loads Are FDA/USDA/3A-Dairy Compliant!

Motion Control – Hybrid Si3N4 Silicon Nitride Radial Ball Bearings

XYZ and Theta - steel-ceramic hybrid bearings
XYZ and Theta - linear motion products

 

 

E. Longmeadow, MA – Motion Control – XYZ and Theta – Deep Groove Hybrid Radial Ball Bearings featuring Si3N4 Silicon Nitride Ceramic balls from LM76 complement their broad range of linear bearings that are FDA/USDA/3A Dairy compliant. These Deep Groove Stainless/Ceramic Hybrid Si3N4 Silicon Nitride Radial Ball Bearings are ideal for the extreme environments experienced in the food, drug, and dairy industries. Capable of high speeds, high radial and axial loads, 24/7 duty cycles, and extreme sanitizing procedures such as high pressure washdown, and caustic foaming agents.

Motion Control – CERAMICSPEED Radial Hybrid Bearings Prevents Arcing!

Motion Control – Hybrid Radial Bearings

motion control- the engineering edge

motion control - hybrid radial bearings

E. Longmeadow, MA – — Motion Control – CeramicSpeed Insulated ball bearings are custom made for electrical motors and your guarantee against damage caused by stray currents.

The ceramic balls used for this product series are non-conductive and have an insulating ability of 15 kV per mm – higher than that of atmospheric air.

Bearings from competing manufacturers with an insulating coating typically have an insulating ability of up to 1 kV; provided that the coating is not damaged – for example when the bearing is mounted. In practice this protection isn’t always sufficient, meaning that these bearings are also vulnerable to damage by stray currents.

In addition to being protected from the passage of electrical currents, the operating temperature is 10-20 °C lower, and the resulting is a bearing life typically 4-8 times longer than traditional steel bearings.

See the Youtube Video CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of motion control linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link


See this and other Motion Control Components from LM76 featured on:

The LM76 Blog

LM76 Catalogs

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - linear bearings

 

Motion Control – “Basic Linear Slides” Are: Pre-aligned, Precision, Low Cost, and Shipped the Same Day!

Motion Control – Single & Dual Axis Linear Slides

motion control - linear motion products
motion control - linear slides

 

E. Longmeadow, MA – Motion Control – New! Precision! Low cost! “Basic Linear Motion Slides” from LM76 are available with self lubricating, MinutemanTM Series, Teflon® composite bearings or exceptionally low friction steel jacketed linear ball bearings. The “Basic Linear Slide” consist of 2 precision drilled end blocks, 2 pieces of hard chrome steel shafting, and a single 2 bearing or double 4 bearing block that is predrilled for easy, “Plug & Play,” integration into new and existing applications.

Motion Control – Application – In “Off-Roading” LM76’s Black Racer Bearing is a Winner!

Motion Control – Application – Ceramic Linear Bearings

motion control - linear bearings

Motion Control – Anyone who’s worked on cars knows how critically important ball joints are to steering and suspension. They also know what happens when ball joints fail!

motion control - lm76 products

E. Longmeadow, MA – — Motion Control – Application Story – When an aftermarket manufacturer of off-road steering and suspension systems needed an upper ball joint bearing, they called LM76. These systems are purchased by off-road vehicle owners who want to upgrade their OEM steering and suspension units for hard-hitting environments. Pounding, shock, sand and debris are all part of the mix when it comes to extreme off-roading and LM76 Black Racer bearings are right at home. According to company engineers, after a year of brutal testing, Black Racer met all design goals and exceeded expectations.

Motion Control – The Engineering Edge – Trunnion Grinding Slide for Oil Field

Motion Control – Custom Linear Slides

Motion Control Engineering edgeMotion Control  Application – We are shipping another slide today for the oil patch. When Weir Oil and Gas called with a slide application that required special engineering, LM76 was all ears – as it was right up our alley.

Motion Control – Application – FDA/Washdown System Excels with Special Linear Motion Shaft Assembly from LM76!

Motion Control – FDA/Dairy Washdown System

motion control - shaft & pillow block

motion control - lm76

 

E. Longmeadow, MA – — Motion Control – Application  – Dairy machinery manufacturers are under intense scrutiny by FDA inspectors when it comes to FDA material and caustic washdown compliance. Recently, LM76 was called by a large US dairy packaging company to review a problematic portion of their filling line. After each shift, the filling line is washed-down, has a caustic foaming agent applied to kill bacteria and then is final rinsed. The caustic foaming agent was destroying – literally eating – the aluminum shaft supports while shafting exhibited pitting and showed signs of minor corrosion. Additionally, there were areas where product got trapped and these locations were havens for bacterial growth. Because this system was in-place and our customer was the end-user, LM76 engineers had to use direct drop-in replacement com¬ponents. What to do?

Motion Control – Linear Motion Roll-Slide Mini from LM76

Motion Control – Miniature Linear Slide

Linear Motion Roller Slide Assembly

Motion Control – Linear Bearings Out Perform “ALL” Other Bearings At High Speed & High Acceleration!

Motion Control – High Speed Linear Bearings


motion control ceramic bearings
E. Longmeadow, MA – Motion Control – LM76’s high speed, “Black Racer,” ceramic coated linear bearings out perform linear ball bushing and linear polymer bearings in high speed and high acceleration/deceleration applications. These drop in replacement linear bearings are designed to be used in standard open and closed pillow blocks. “Black Racer” linear bearings are ideal for: Rocket sleds, crash test systems, and other high speed, high acceleration application.

Motion Control – Application – Whisper Slides for Harvesting Honey

Motion Control – Application – Linear Slides
Engineering Edge - Honey Application

Sometimes, an application leads you to an immediate, off-the-shelf solution – like this one. Harvesting bee honey is a seasonal opportunity and these systems are hauled across the country to make it happen. They need to be all weather, tough and maintenance-free. The next time you take some honey and put it in your tea, think of us – LM76.

Motion Control – CERAMICSPEED Bearing Units Are FDA Compliant!

Motion Control – Ceramic Radial Bearings are FDA Compliant

motion control radial bearings
motion control - lm76

 

 

E. Longmeadow, MA – LM76 is continuing to expand its FDA compliant radial and linear bearing product lines. CERAMICSPEED Bearing Units are the latest additions. Bearings used in the food and beverage industry have to be reliable, easily cleaned, and require only minimal maintenance. CERAMICSPEED Bearing Units featuring FDA-approved Si3N4 (Silicon Nitride) balls have extremely long service life as Si3N4 balls are 2 times harder than steel balls and 4 times smoother. This means, CERAMICSPEED Bearing Units handle higher loads with less friction, resulting in longer life of the balls and the race.

Motion Control – ETX Unitized Pillow Block Bearings Are FDA Compliant!

Motion Control – ETX Bearing/Pillow Block
engineering edge

We needed a bearing block that would be FDA compliant, washdown compliant and…be able to take a radioactive environment. We made a unitized bearing and mounting block combination that met application requirements. You won’t find this an any catalog!

Motion Control – Linear Motion – How Do You Move Articles of Antiquity?

Motion Control – Linear Bearings Application
motion control - engineering edge
Motion Control Application – How Do You Move Articles of Antiquity?

Very Carefully With A High Load Rail System from LM76!

motion control - application

E. Longmeadow, MA – — Motion Control Application -The Boston Museum of Fine Arts (MFA) has to move articles of antiquity from one location to another. In this instance, they are moving a 5000 year old relief (hieroglyphics) weighing 8000 pounds to a new location in the Museum. Here is a frontal photo of the Relief from The Tomb of Senenuka.

motion control - linear motion products

Part of wall from tomb of Senenuka; nine stones fitting together and including two niches; lower left piece smooth limestone; upper far left preliminary black ink sketch; right of this sketch is a complete relief showing two seated figures; central piece has large scene of seated male on the left and other smaller male figure to the right; upper far right male figure relief outline; left of this again a scene of two seated figures at a table.

Senenuka Time of Khufu or Khafre (Maybe Dyn 5?) Overseer of the Pyramid-town of Khufu, Director of King’s wad-priests, Boundary official of a settlement, etc.

Motion Control -What To Consider When Specifying A Linear Slide

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

motion control - linear motion products

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

motion control - linear slides

The Engineering Edge – Special Custom Machined Linear Shafting

Motion Control – Custom Machined Linear Shafting