Linear Rail System – Motion Control Blogger

Motion Control – Linear Guide Systems Move 1200 Lb. Loads At Speeds Of 30 Feet Per-Second!

September 07, 2023 Editor

Motion Control – High Speed Block and Rail Sets

E. Longmeadow, MA – Motion Control – Two new series of high speed, low cost, compact linear guide systems called, “Speed Guides,TM” have been introduced by LM76. The Speed Demon OSG type and Speed Demon SG type linear guide systems are designed for speeds up to 10 m/sec. (32.8 ft/sec.), accelerations to 50 m/sec.2 and loads up to 5600 N. (1259 lbs.). These quiet, low profile guide systems are ideal for: High speed assembly and sorting operations, pick and place robots, industrial, office, and packaging machines, vacuum applications, and medical equipment (including patient care devices).

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks with Si3N4 Silicon Nitride Hybrid Bearings, Set New Standard for Performance and Hygienics!

June 22, 2023 Editor

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks

E. Longmeadow, MA – Motion Control – FDA/USDA Certified, two, three and four post, Stand-Off Bearing Flange Blocks are setting a new standard for performance and Hygienics. These new Stand-off bearing flange blocks now available from LM76 reduce the surface area where mold and bacteria can thrive, even from the most through sanitizing operations. Long life Hybrid Stainless Steel Si3N4 Silicon Nitride Ceramic Ball Bearings in Stainless Steel bearing blocks are coated with a smooth non-water absorbing polyamide coating certified by EHEDG, USDA, and 3-A.

Motion Control – CERAMICSPEED Radial Hybrid Bearings Prevents Arcing!

April 12, 2023 Editor

Motion Control – Hybrid Radial Bearings

E. Longmeadow, MA – — Motion Control – CeramicSpeed Insulated ball bearings are custom made for electrical motors and your guarantee against damage caused by stray currents.

The ceramic balls used for this product series are non-conductive and have an insulating ability of 15 kV per mm – higher than that of atmospheric air.

Bearings from competing manufacturers with an insulating coating typically have an insulating ability of up to 1 kV; provided that the coating is not damaged – for example when the bearing is mounted. In practice this protection isn’t always sufficient, meaning that these bearings are also vulnerable to damage by stray currents.

In addition to being protected from the passage of electrical currents, the operating temperature is 10-20 °C lower, and the resulting is a bearing life typically 4-8 times longer than traditional steel bearings.

See the Youtube Video CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of motion control linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog … … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

See this and other Motion Control Components from LM76 featured on:

The LM76 Blog

LM76 Catalogs

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Motion Control – “Basic Linear Slides” Are: Pre-aligned, Precision, Low Cost, and Shipped the Same Day!

March 22, 2023 Editor

Motion Control – Single & Dual Axis Linear Slides

E. Longmeadow, MA – Motion Control – New! Precision! Low cost! “Basic Linear Motion Slides” from LM76 are available with self lubricating, MinutemanTM Series, Teflon® composite bearings or exceptionally low friction steel jacketed linear ball bearings. The “Basic Linear Slide” consist of 2 precision drilled end blocks, 2 pieces of hard chrome steel shafting, and a single 2 bearing or double 4 bearing block that is predrilled for easy, “Plug & Play,” integration into new and existing applications.

Motion Control – The Minuteman Series, Teflon® Composite Bearings Are Now Available As A Twin Pillow Block Linear Rail Assembly!

December 02, 2022 Editor

Motion Control – Teflon® Composite Twin Bearing/Pillow Block Rail Assembly!

E. Longmeadow, MA –Motion Control – Save time and energy by ordering one or more Minuteman^TM M-SRBT Twin Pillow Block Linear Rail Assemblies from LM76. Recognized by engineers, machine builders, and retrofitters, the Minuteman^TMSeries of Teflon® composite bearings from LM76 are ideal for applications that involve linear, rotary, and/or oscillating motion. The self lubricating Minuteman Series composite bearings can handle 10 times the load, has a very low coefficient of friction, dampen vibrations, tolerates shock, and are lower in cost than that of conventional linear ball bearings.

These composite bearings can be submerged, washed down with water, high pressure steam, or chemicals, and can operate in harsh, abrasive, and contaminated environments.

Motion Control – Application – In “Off-Roading” LM76’s Black Racer Bearing is a Winner!

November 04, 2022 Editor

Motion Control – Application – Ceramic Linear Bearings

Motion Control – Anyone who’s worked on cars knows how critically important ball joints are to steering and suspension. They also know what happens when ball joints fail!

E. Longmeadow, MA – — Motion Control – Application Story – When an aftermarket manufacturer of off-road steering and suspension systems needed an upper ball joint bearing, they called LM76. These systems are purchased by off-road vehicle owners who want to upgrade their OEM steering and suspension units for hard-hitting environments. Pounding, shock, sand and debris are all part of the mix when it comes to extreme off-roading and LM76 Black Racer bearings are right at home. According to company engineers, after a year of brutal testing, Black Racer met all design goals and exceeded expectations.

Motion Control – SAIBO’s LGV Curved and Straight Block and Rail Systems are Featured in YouTube Video Produced by Design World Magazine!

October 07, 2022 Editor

Motion Control – Curved & Straight Block & Rail System

Motion Control – In this product spotlight video, Design World Senior Editor Miles Budimir and Associate Editor Mike Santora have a look at the SB-LGV linear motion system from LM76. The rails come in straight, curved, and ring geometries and the four-roller carriage blocks feature two eccentric rollers for preload adjustment.

Play The Video

E. Longmeadow, MA – Motion Control – Linear Products – SAIBO’s LGV Curved and Straight Block and Rail Systems Available from LM76 are Featured in YouTube Video Produced by Design World Magazine!

Motion Control – The Engineering Edge – Trunnion Grinding Slide for Oil Field

September 23, 2022 Editor

Motion Control – Custom Linear Slides

Motion Control Application – We are shipping another slide today for the oil patch. When Weir Oil and Gas called with a slide application that required special engineering, LM76 was all ears – as it was right up our alley.

Motion Control – Kollmorgen debuts new generation of robot-ready frameless servo motors

August 27, 2022 Editor

Motion Control – Frameless Servos for Robots

Vaughan, Ontario, Canada — Motion Control Components — Kollmorgen has introduced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

Resulting from several years of research, testing and customer feedback, the TBM2G series offers high-performance torque in an extremely compact electromagnetics package. These next-generation motors enable robots with lower joint weight, higher load-carrying capacity, improved energy efficiency, lower thermal rise, and faster, smoother movements.

Motion Control – Linear Motion Roll-Slide Mini from LM76

July 26, 2022 Editor

Motion Control – Miniature Linear Slide

Motion Control – Linear Bearings Out Perform “ALL” Other Bearings At High Speed & High Acceleration!

June 06, 2022 Editor

Motion Control – High Speed Linear Bearings

E. Longmeadow, MA – Motion Control – LM76’s high speed, “Black Racer,” ceramic coated linear bearings out perform linear ball bushing and linear polymer bearings in high speed and high acceleration/deceleration applications. These drop in replacement linear bearings are designed to be used in standard open and closed pillow blocks. “Black Racer” linear bearings are ideal for: Rocket sleds, crash test systems, and other high speed, high acceleration application.

Motion Control – Application – Whisper Slides for Harvesting Honey

February 05, 2022 Editor

Motion Control – Application – Linear Slides

Sometimes, an application leads you to an immediate, off-the-shelf solution – like this one. Harvesting bee honey is a seasonal opportunity and these systems are hauled across the country to make it happen. They need to be all weather, tough and maintenance-free. The next time you take some honey and put it in your tea, think of us – LM76.

Motion Control – CERAMICSPEED Bearing Units Are FDA Compliant!

January 24, 2022 Editor

Motion Control – Ceramic Radial Bearings are FDA Compliant

E. Longmeadow, MA – LM76 is continuing to expand its FDA compliant radial and linear bearing product lines. CERAMICSPEED Bearing Units are the latest additions. Bearings used in the food and beverage industry have to be reliable, easily cleaned, and require only minimal maintenance. CERAMICSPEED Bearing Units featuring FDA-approved Si3N4 (Silicon Nitride) balls have extremely long service life as Si3N4 balls are 2 times harder than steel balls and 4 times smoother. This means, CERAMICSPEED Bearing Units handle higher loads with less friction, resulting in longer life of the balls and the race.

Motion Control – The Engineering Edge – Application – ETX Pillow Blocks!

December 16, 2021 Editor

Motion Control – Application

ETX Pillow/Block Bearings for Radioactive Environments

This was a troublesome application. This system is completely submerged in radioactive water at a nuclear power plant. So no Teflon, no seals, no lubrication – nothing that will degrade in a radioactive environment. The majority of components are stainless steel – except for our ceramic coated/supported shafting and our special, designed for this particular application/never made before, ETX self-lubricating linear blocks.

Motion Control – Linear Motion – How Do You Move Articles of Antiquity?

November 15, 2021 Editor

Motion Control – Linear Bearings Application

Motion Control Application – How Do You Move Articles of Antiquity?

Very Carefully With A High Load Rail System from LM76!

E. Longmeadow, MA – — Motion Control Application -The Boston Museum of Fine Arts (MFA) has to move articles of antiquity from one location to another. In this instance, they are moving a 5000 year old relief (hieroglyphics) weighing 8000 pounds to a new location in the Museum. Here is a frontal photo of the Relief from The Tomb of Senenuka.

Part of wall from tomb of Senenuka; nine stones fitting together and including two niches; lower left piece smooth limestone; upper far left preliminary black ink sketch; right of this sketch is a complete relief showing two seated figures; central piece has large scene of seated male on the left and other smaller male figure to the right; upper far right male figure relief outline; left of this again a scene of two seated figures at a table.

Senenuka Time of Khufu or Khafre (Maybe Dyn 5?) Overseer of the Pyramid-town of Khufu, Director of King’s wad-priests, Boundary official of a settlement, etc.

Motion Control -What To Consider When Specifying A Linear Slide

August 13, 2021 Editor

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

July 24, 2021 Editor

Motion Control – Profile Rail Stages

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

Motion Control – Excellence Canada announces Electromate is a recipient of the 2021 Canadian Business Excellence Awards for Private Businesses!

July 17, 2021 Editor

TORONTO, Canada — Motion Control – TORONTO, May 21, 2021 (GLOBE NEWSWIRE) – Electromate Inc. is pleased to announce that, at the upcoming fifth annual Canadian Business Excellence Awards for Private Businesses being held on Wednesday June 9th, Excellence Canada will be awarding Electromate with their Canadian Business Excellence Award.

“Recipients of this distinguished award have clearly demonstrated a strategic approach to successfully improving business performance and achieving goals, with a focus on the following three key performance areas: Delighted Customers; Engaged Employees; and Innovation,” says Allan Ebedes, President and CEO, Excellence Canada.

Excellence Canada’s mission is to help improve organizational performance and recognize excellence, with a vision to promote and enable excellence in every organization in Canada.

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

July 10, 2021 Editor

Motion Control – ETX Pillow Block/Bearings for Radioactive Environments

E. Longmeadow, MA Motion Control – Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures As there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free. Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water.

To see the “Motion Control Application – ETX Pillow/Block Bearings for Radioactive Environments” CLICK HERE

Designed with a slight interference fit between bearing ID and shaft, contaminates are scraped from the shaft’s surface. The low frictional characteristics of ETX have little impact on drive force. They are now available in Inch and Metric sizes.

Motion Control Application – Open Screw Drive System Moves Heavy Sound Stage Sets Smoothly, Quickly, and Quietley!

April 03, 2021 Editor

Motion Control Application – High Speed Drive System

E. Longmeadow, MA –Motion Control Application-

Problem: Move heavy sets on a sound stage smoothly, quickly, and most importantly quietly! Ball screws specified in the original design proved unacceptable due to the limited length of travel, screw deflection which resulted in a lack of smoothness, and high noise levels. A rack and pinion was also considered but the noise level was also too high and there was no room for a gearbox. Linear motors are quiet however the cost was prohibitive, and a belt system could not handle the heavy loads.

Solution: The new Streamliner Open Screw Drive System from Winner was selected by the production company to move the heavy sets on the sound stage.

Category Archives: Linear Rail System

Motion Control – High Speed Block and Rail Sets

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks

Motion Control – Hybrid Radial Bearings

When others think catalog … … LM76 thinks solution!

Motion Control – Single & Dual Axis Linear Slides

Motion Control – Teflon® Composite Twin Bearing/Pillow Block Rail Assembly!

Motion Control – Application – Ceramic Linear Bearings

Motion Control – Curved & Straight Block & Rail System

Motion Control – Custom Linear Slides

Motion Control – Frameless Servos for Robots

Motion Control – Miniature Linear Slide

Motion Control – High Speed Linear Bearings

Motion Control – Application – Linear Slides

Motion Control – Ceramic Radial Bearings are FDA Compliant

Motion Control – Application

ETX Pillow/Block Bearings for Radioactive Environments

Motion Control – Linear Bearings Application Motion Control Application – How Do You Move Articles of Antiquity?

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

Motion Control – Profile Rail Stages

Motion Control – ETX Pillow Block/Bearings for Radioactive Environments

Follow Us!

CATEGORIES

Recent Posts

Motion Control – Linear Bearings Application

Motion Control Application – How Do You Move Articles of Antiquity?