Category Archives: Joystick

Motion Control – Open Aperture Voice Coil Stages Feature 1.20 Inches of Travel and Resolutions of 29.95 and 25.4 Microns!

Motion Control – Open Aperture Voice Coil Stages!

motion control - voice coil stagemotion control - moticont

 

Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up.

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

Motion Control – Vertical Lift Stage

motion control - vertical lift stage
Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 In.).
motion control - OES Components

 

 

The twin lead (right and left hand thread) precision ground screw and six guide rails provides smooth, flat (parallel to mounting surface), vertical motion, and high resolution to 5 µ (non-microstepping) and 0.50 µ (10 Microstep Driver), and repeatability is 10 µ at travel speeds of 5 mm/sec. Applications for the AT10-120 vertical lift stage include: Testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research facilities.

Motion Control – Linear Voice Coil Motor Tolerates Tilting

Motion Control – Linear Voice Coil Motor Tolerates Tilting

motion control - voice coil motors


motion control - moticontVan Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). 
Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

Motion Control – Profile Rail Stages

motion control - linear stages


motion control -oesVan Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

Motion Control – Moticont Adds 1 Inch Stroke, Direct Drive Linear Actuator to Their Patented SDLM Series of Electric Cylinders!

Motion Control –  Electric Cylinders!

motion control - electric Cylinder


motion control - moticont
Van Nuys, CA — Motion Control – The SDLM Series of Electric Cylinders from Moticont now includes a 1.0 inch (25.4 mm) stroke actuator in their compact 0.750 in. (19.1 mm) diameter series of linear actuators. The new SDLM-019-095-01-01 actuator features a continuous force of 6.8 oz (1.9 N) and a peak force of 21.6 oz (6.0 N). A precision linear optical quadrature encoder is integrated and protected inside the actuator housing.

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

Motion Control – Open Aperture XY Stages!

motion control- xy stages

Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and high 1.5 micron repeatability.

motion control - OES

The AU200-15×15-04 stage includes Quadrature encoders for position verification. Both stages have a large 3.54 in. x 3.54 in. (90 mm x 90 mm) platform with large open aperture and feature standard 1 mm-per-turn ground lead screws, and precision V-grove and Cross Roller guides.

Motion Control – NEW! Three-axis Gimbal Mount with Three-Phase Brushless Servo Motors has Higher Resolution and Speed!

Motion Control – Servo Motor Three-axis Gimbal Mount!

motion control - gimbal mount

Van Nuys, CA – The New AU300-AER-02 Three-axis Gimbal Mount from OES (Optimal Engineering Systems, Inc.) with Three-Phase Brushless Servo Motors and Quadrature Incremental Encoders features very high resolution and high speed. Each axis features: Low backlash worm gear drives and precision “V” groove and cross roller bearings for high accuracy and repeatability. The typical accuracy is 0.05° equal to 180 arcsec and typical repeatability is +/- 0.01° equal to +/- 36 arcsec. The maximum travel speed of each axis is 45° per second.

motion control -oes

This new three-axis gimbal mount handles loads up to 10 kg (22 lbs) and has a clearance of 300 mm x 300 mm (11.8 in. x 11.8 in.) around the roll axis stage and each stage is capable of the full 360° rotation of its axis. The azimuth axis rotary table is mounted on a large 360 mm (14.173 in.) x 360 mm (14.173 in.) x 13 mm (0.512 in.) plate with handles and has predrilled accessible mounting holes for easy integration into new or existing applications and for increased stability.

Low Cost, Plug-and-Play, One, Two, Three, and Four Axis Joystick Motion Controllers from OES!

Motion Control Components - Joy Stick from OES

OES Logo

Van Nuys, CA – — Motion Control Components – Ergonomic, easy to use, and integrated Joystick motion controllers for steppers, DC motors, and servo motor drivers in one, two, three, and four axis models are available from OES (Optimal Engineering Systems, Inc.). Users can choose from 18 models providing: Step and Direction signals per axis, Quadrature signals per axis, Analog Signals per axis and PWM and Direction signals per axis. The tilt angle of the joystick controls the speed of motion. The three, button selected, speed ranges are high speed, medium speed, and slow speed. These, low cost, long life, Joysticks have a 5.5 feet long cord and the standard connector is a 25-pin-DB-25, male connector. The maximum speeds may be set by the user via the supplied, easy to use GUI.

Two slide switches engage/disengage the joystick for shipping. The footprint of the joystick is 4.76 inches wide by 7.80 inches long. OES also offers complete Plug-and-Play systems including, motors, encoders, drivers, and cabling.

The AU300-XZ Motorized Three-axis Gimbal Mount can be ordered as a complete plug-and-play system with a multi-axis controller, joy stick, track ball, or keypad, and with a 30 mm thru hole in the roll stage.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos