Elevator Stage – Motion Control Blogger

Motion Control – Serial Communication Controlled Solenoid Drivers Available from OES!

April 27, 2023 Editor

Motion Control – Solenoid Drivers

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four Solenoid Drivers that are configured via TTL serial communications. These low cost, very high reliability, microcomputer based, compact 76.2 mm by 76.2 mm (3.00 in. by 3.00 in.) solenoid drivers are ideal for solenoids, relays, actuators and electromagnets in applications such as: Mixing, disconnects, door controls, cabinet locks, fire suppression systems, vending machines, valve control, transmission shifting, sorting, and farm machinery. These solenoid drivers can also be used for proportional solenoid control.

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

March 16, 2023 Editor

Motion Control – 0.03 micron Resolution Elevator Stage!

motion control - elevator stage

Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES). These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables and 20 mm of vertical travel. High precision ball bearing profile rails assure very high parallelism and smooth motion throughout the raising and lowering of the table. These Z-Axis Stages are ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

November 14, 2022 Editor

Motion Control – Yaw Pitch Stages

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – High Precision 300 MM Motorized Vertical Lift Stage from OES Features: Stability, High Load Capability, and Low Cost!

November 01, 2022 Editor

Motion Control – Vertical Lift Stage

Van Nuys, CA – — Motion Control – A vertical lift of 300 mm (11.811 in.), high stability, and low cost are just some of the features of the AT20-300 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES). This high load, 50 kg (110.2 lbs), vertical lift stage can be easily integrated into almost any application. The large 400 mm x 200 mm (15.748 in. x 7.874 in.) stage has a pattern of threaded mounting holes. The rigid box construction of the moving component of the elevator stage travels on six slide rails assuring smooth vertical travel and parallelism of the table and mounting surface at all times, and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy.

Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!

October 17, 2022 Editor

Motion Control – Motion Controllers for Servos and Steppers!

Van Nuys, CA – — Motion Control – Need a quick and easy solution to install a single or multi-axis Plug-and-Play motion controller? The answer: The MCC Series of stepper and servo motor controllers from OES (Optimal Engineering Systems) which are designed to control from one to four axes of motion for users without prior motion control experience. These MCC controllers integrate a motion control card and operator interface in one package. Having a user-friendly interface, they allow the user to operate the motion controller, without the need for a PC, PLC, host controller, or programming.

The modes of operations are: Set Acceleration, Set Velocity, Set Position, Absolute Move, Relative Move, Find Home, Reset Position Counter, Go to Position Zero, Joystick Operation and Stop All Motors. The MCC Controllers feature a 4-Line LCD, 32-button keypad, STEP and DIRECTION outputs for each axis.

Motion Control – High Precision Motorized Goniometer Stage from OES!

September 03, 2022 Editor

Motion Control – Goniometer Stage

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low-cost solution for the precise measurement of angles or the rotation of an object to a precise angular position.

This 160 mm x 160 mm stage with +/- 15o of rotation at speeds to 10o/sec, features a 400:1 worm gear ratio and a resolution of 0.0005 degrees with a 10 micro-step per step stepper motor driver; the stage is also available with a servo motor and optical encoder.

Motion Control – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!

August 12, 2022 Editor

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

Van Nuys, CA – — Motion Control – An extensive series of XZG Positioning Stages (X-axis, Z-axis, and Goniometer) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for both the X and Z axes that feature high precision 1 mm per turn lead screws, and if required travel lengths over 100 mm are also available. Additionally, any of three goniometers with +/-10, +/-15, +/-45 degrees of travel can be selected and mounted in a horizontal (pictured) or vertical orientation.

Additionally, four motor options are the: -01 version which has Stepper Motor driven axes, -02 version has Three Phase-Servo Motor driven Axes, -03 version has DC Servo Motor Driven Axes and -04 version has Stepper Motor Driven Axes with Quadrature Optical Encoders for position verification.

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

March 29, 2022 Editor

Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 In.).

Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!

January 19, 2022 Editor

Motion Control – Open Aperture XY Alignment Stage

Van Nuys, CA – — Motion Control – New high resolution and high repeatability Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). Supplied with a standard 4 mm-per-turn ground lead screw, the AU200-200×200 Alignment Stages feature 200 mm (7.874 in.) of travel in both the X and Y axes. These low profile 80 mm (3.179 in.) high XY stages have a 250 mm x 250 mm (9.842 in. x 9.842 in.) open aperture.

Motion Control – High Precision, XAB Triple-Axis (2 Goniometers and X-Axis) Stage Available from OES!

January 03, 2022 Editor

Motion Control – Triple-Axis Stage!

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost solution for the precise measurement of compound angles or the rotation of an object to precise angular positions.

The XAB-050-XX-01 integrates a two-axis Alpha-Beta goniometer on top of a single-axis linear actuator. The Beta-axis has a travel range of +/- 15 degrees with a rotation height of 50 +/- 0.2 mm.

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

December 10, 2021 Editor

Motion Control – Profile Rail Stages

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

Motion Control – High Precision Motorized Vertical Elevator Stages Are Available from OES!

May 20, 2021 Editor

Motion Control – Elevator Stages

Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively.

The vertical motion of each Z-Axis Stage is driven by an 8 mm diameter ball screw with a 1 mm lead, and guided by cross roller bearings. Very high resolutions of 0.1 micron or 0.05 microns with 10/20 micro-steps per step motor drive, and repeatability of +/- 0.5 microns makes these two Z-Axis Stages ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Motion Control – High Precision 60 mm Vertical Elevator Stages from OES!

May 05, 2021 Editor

Motion Control – Elevator Stages!

Van Nuys, CA – — Motion Control – The AT10-60-01, AT10-60-02 and the AT10-60-03 Motorized Elevator Stages have been released by Optimal Engineering Systems, Inc. (OES). The AT10-60-01 (shown) is driven by a Two-Phase Stepper Motor with micro-stepping capabilities. The repeatability is typically +/- 5 micron and typical positional accuracy is 15 micron. The knob for manual adjustment can be replaced with a Quadrature Incremental Optical Encoder for position verification.

Motion Control – High Precision Vertical Elevator Stage from OES!

November 30, 2017 Editor

Applications for the AZ60-A elevator stage include: Photonic alignment, wafer inspection, precision vertical alignment, laser marking, optical positioning, testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research facilities.Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator stage for applications requiring precise vertical positioning. The 60 mm x 95 mm (2.362 in. x 3.740 in.) drilled and tapped stage has a vertical travel of 4 mm (0. 157 In.). Six crossed roller guides and a precision ground 8 mm dia. 250 µm/turn lead ball screw provides smooth, straight (straightness to <5 µm) vertical motion, and parallelism (<20 µm to the mounting surface), and high resolutions to 1.25 µm (full step), 0.625 µm (1/2 step), and 0.125 µm (1/10 micro step), and repeatability to +/- 0.5 µm. Travel speeds are up to 2.5 mm/sec.

The AZ60 – A Elevator Stage is constructed of black-anodized aluminum alloy and weighs just 1.14 kg (2.51lbs). A powerful 35 mm NEMA 14 1.8O 2-phase stepper motor has a double ended shaft with a knob for manual adjustments. This knob may be replaced with a quadrature encoder for position verification. The non-cantilevered moving wedge elevator stage has a load capacity of 7 kg (15.43 lbs) without concern for loss of parallelism, and the base plate has easy to access holes for mounting.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For Additional information about the AZ60-A Elvator stage CLICK HERE!

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com
See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com