Category Archives: Components – FDA/USDA-3A-Dairy Compliant

Motion Control – Linear Guide Systems Move 1200 Lb. Loads At Speeds Of 30 Feet Per-Second!

Motion Control – High Speed Block and Rail Sets
motion control - linear block & rail

motion control - linear motion products

 

 

E. Longmeadow, MA – Two new series of high speed, low cost, compact linear guide systems called, “Speed Guides,TM” have been introduced by LM76. The Speed Demon OSG type and Speed Demon SG type linear guide systems are designed for speeds up to 10 m/sec. (32.8 ft/sec.), accelerations to 50 m/sec.2 and loads up to 5600 N. (1259 lbs.). These quiet, low profile guide systems are ideal for: High speed assembly and sorting operations, pick and place robots, industrial, office, and packaging machines, vacuum applications, and medical equipment (including patient care devices).

The Engineering Edge – Application – Whisper Slides for Harvesting Honey

Motion Control – Application – Linear Slides
Engineering Edge - Honey Application

Sometimes, an application leads you to an immediate, off-the-shelf solution – like this one. Harvesting bee honey is a seasonal opportunity and these systems are hauled across the country to make it happen. They need to be all weather, tough and maintenance-free. The next time you take some honey and put it in your tea, think of us – LM76.

Motion Control – CERAMICSPEED Bearing Units Are FDA Compliant!

Motion Control – Ceramic Radial Bearings are FDA Compliant

motion control radial bearings
motion control - lm76

 

 

E. Longmeadow, MA – LM76 is continuing to expand its FDA compliant radial and linear bearing product lines. CERAMICSPEED Bearing Units are the latest additions. Bearings used in the food and beverage industry have to be reliable, easily cleaned, and require only minimal maintenance. CERAMICSPEED Bearing Units featuring FDA-approved Si3N4 (Silicon Nitride) balls have extremely long service life as Si3N4 balls are 2 times harder than steel balls and 4 times smoother. This means, CERAMICSPEED Bearing Units handle higher loads with less friction, resulting in longer life of the balls and the race.

Motion Control – ZrO2 Zirconia Ceramic Radial Ball Bearings For High Loads available from LM76 are FDA/USDA/3A-Dairy Compliant!

Motion Control – Zirconia Ceramic Radial Bearings
motion control radial bearings

E. Longmeadow, MA — Motion Control – LM76 has announced the release of their new line of Radial Ball Bearings featuring ZrO2 (Zirconia) Ceramic balls. To Complement LM76’s broad range of Linear Bearings that are FDA/UDSA/3A Dairy compliant, as well as linear bearings for extreme environments; they have added Deep Groove bearings which accommodate radial and axial loads, Angular Contact bearings for simultaneously handling radial and axial loads, Spherical Bearings which are self aligning, and Thrust Bearings for high axial loads. Each of the four types of metric bearings are available in a wide range sizes.

motion control - linear motion products

The advantages of ZrO2 ceramic balls are: FDA/USDA/3A Dairy/Caustic washdown compliant, lighter than steel balls and can be used at extreme RPMs, they withstand higher loads without spalling, have a lower coefficient of friction, are inert to chemicals, have no magnetic signature, and are non conductive.

Motion Control -What To Consider When Specifying A Linear Slide

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

motion control - linear motion products

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

motion control - linear slides

Linear Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control – ETX Pillow Block/Bearings for Radioactive Environments

motion control pillow blocks/bearings

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures As there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free. Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water.

To see the “Motion Control Application – ETX Pillow/Block Bearings for Radioactive Environments” CLICK HERE

motion control - lm76

Designed with a slight interference fit between bearing ID and shaft, contaminates are scraped from the shaft’s surface. The low frictional characteristics of ETX have little impact on drive force. They are now available in Inch and Metric sizes.

Motion Control Application – Implantable medication delivery systems: Where every microliter counts!

Motion Control – Miniature Motor Application

Implantable medication delivery systems can have a decisive influence on the quality of life of the patients. In many cases, such delivery systems are vital for the survival of the patients – the systems have to be absolutely reliable. maxon motor manufactures high-precision micro drives for medication delivery systems.
motion control application - implantable pump


motion control - maxonFall River, MA — Motion Control Components Application – Patients that suffer from chronic pain, metabolic disorders, diseases of the central nervous system and tumor diseases require accurately dosed medication. Here implantable medication delivery systems are used. Through the localized medication delivery, the dosage can be reduced to the required minimum. These infusion systems thus improve the quality of life of the patients. For many patients, it is only the medication delivery system that allows them to have a life outside of the clinic.

Motion Control – CERAMICSPEED Bearing Units Are FDA Compliant!

motion control - ceramic bearings
motion control - lm76

 

 

E. Longmeadow, MA – LM76 is continuing to expand its FDA compliant radial and linear bearing product lines. CERAMICSPEED Bearing Units are the latest additions. Bearings used in the food and beverage industry have to be reliable, easily cleaned, and require only minimal maintenance. CERAMICSPEED Bearing Units featuring FDA-approved Si3N4 (Silicon Nitride) balls have extremely long service life as Si3N4 balls are 2 times harder than steel balls and 4 times smoother. This means, CERAMICSPEED Bearing Units handle higher loads with less friction, resulting in longer life of the balls and the race. Balls made from Silicon Nitride do not change their shape under load and are not subject to spalling which can contaminate the foods or beverages being processed. They are also very tolerant of temperature extremes (-30OC to 100OC) and thermal shock.

Motion Control – NEW! Super Wear Resistant FDA-USDA Compliant Cam Follower Bearings!

Motion Control – Cam Follower Bearings!

motion control - cam followers


motion control - lm76

E. Longmeadow, MA –Motion Control – LM76 has introduced their RINO Series of FDA/USDA compliant Cam Follower Bearings. Available in 12 sizes these all new cam follower bearings integrate: Stainless steel studs, hybrid stainless steel/ceramic bearings, FDA approved Lubricant, and poly-crystalline non-metallic tires. Mounted on stainless steel studs, LM76’s CERAMICSPEED hybrid radial bearings incorporate a stainless steel race and low friction ceramic balls that can handle high loads, are capable of high speed operation, and have an exceptionally long service life. The tire is formed from a super wear resistant poly-crystalline compound that has no soft spots and will not deform under pressure.

Developed for applications in food and drink processing, dairy, poultry and meat processing, medical, pharmaceutical, and Bio-Pharma industries these cam follower bearings can be repeatability sanitized with caustic cleaning agents, steam, and high pressure washes.

The smallest of the series of cam follower bearings is the X1-6, having a 0.625 in. O.D. and capable of handling a 60 lb load. The largest of the 12 is the X1-20 with an O.D. of 2.000 in. and is capable of handling a 560 lb load. Each bearing is permanently lubricated with FDA SLT DRYLUBE which coats the race and balls and not displaced by high pressure or caustic chemicals.

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com


See this and other Motion Control Components from LM76 featured on:

The LM76 Blog

LM76 Catalogs

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - lm76

 

The Engineering Edge – High Speed Linear Motion – Sleeve Style Linear Bearings

linear motion sleeve type linear motion bearings

LM76 has two standard options for sleeve-style linear bearings when replacing linear ball bearings. Same format, dramatically different results.

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

FDA/USDA and 3A-Dairy Compliance Brochure features Linear Motion Components from LM76!

LM76

E. Longmeadow, MA — Motion Control Components – Linear Motion – Food processing and beverage plants’ wash down areas are unique environments that undergo harsh treatment from high pressure washers, steam, and a multitude of caustic chemicals used in the cleaning and sanitizing production equipment. OEMs and maintenance departments need to select components that will not trap contaminating debris and can be thoroughly evacuated following Sanitation Standard Operating Procedures (SSOPs). SSOPs are detailed schedules and procedures specifying what to clean, how to clean, how often to clean, and the record keeping used for monitoring.

A helpful component selection guide from LM76, “Linear Bearings, 6 Simple Steps – FDA Compliance, Wash Down Compliance,” details the linear motion components available from LM76 that are FDA/UDSA/3A-Dairy compliant. Included are: Foodstream electrodeless nickel plated pillow blocks, PTFE lined stainless steel bearings, ceramic coated linear bearings, self-aligning corrosion resistant linear ball bearings, and Thomson® Super SmartTM corrosion resistant, self-aligning, high load linear ball bearings. Shafting to compliment the type of bearing selected includes: Class L Stainless 303/304/316, 440C case hardened stainless, Rc 60 case hardened steel with an Armoloy coating and also Rc78 Class L for enhanced hardness and wear resistance. End blocks and shaft supports that have a ceramic or electrodeless nickel coating are also available, as well as new ETX Scraper Seals that prevents intrusion of contaminates adding another line of defense.

LM76 also designs and custom builds linear slides from Stainless Steel and other FDA wash down compliant materials

Shafting options include: Solid and hollow Class L RC60, 300 series stainless steel in lengths to 12 feet. FDA/USDA/3A-Dairy compliant, shafting features: Excellent corrosion and chemical resistance, custom machining to print, pre-drilling and assembly.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – FDA/USDA/3-A Dairy Compliant Linear Motion Components

Motion Control - Linear Motion - Fluidline Linear Bearings

 

Motion Control – Linear Motion – LM76 FluidLine Motion Control Linear/Rotary bearings are FDA/USDA & 3A Dairy Complaint. They are also caustic wash down inert. FluidLine bearings one piece construction has benefits over traditional Teflon Composite lined aluminum bearings: if you have a wear situation, Teflon Composite Bearings have a .035″ Teflon Composite Liner. Once you wear through the liner, you are into the aluminum shell. FluidLine bearings will simply wear more and more until they are too sloppy and can replaced at your convenience. They are also less expensive in volume because there are fewer manufacturing operations. We can easily design and produce special ID’s, OD’s, Lengths and features such as flanges.

For Additional Information:

Fluidline Linear Bearings (Description) CLICK HERE

Fluidline Linear Bearings (Catalog page) CLICK HERE

Electroless Nickel Pillow Blocks and Flange Blocks CLICK HERE

FDA/USDA/3-A Dairy Compliance Brochure CLICK HERE

Call Mike Quinn 1-800-513-3163 to find out if FluidLine is a good match for your application.

Or email: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – Linear Bearings Out Perform “ALL” Other Bearings At High Speed & High Acceleration!

Motion Control – High Speed Linear Bearings


motion control ceramic bearings
E. Longmeadow, MA – LM76’s high speed, “Black Racer,” ceramic coated linear bearings out perform linear ball bushing and linear polymer bearings in high speed and high acceleration/deceleration applications. These drop in replacement linear bearings are designed to be used in standard open and closed pillow blocks. “Black Racer” linear bearings are ideal for: Rocket sleds, crash test systems, and other high speed, high acceleration application.