Motion Control – LFA-2010 Linear Focus Actuator from Equipment Solutions.

Equipment Solutions Motion Control LFA-2010 Linear FocusActuator

Sunnyvale, CA — – The motion control LFA-10 Linear Focus Actuator is a high performance compact positioning system. It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke. The LFA-10 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment. Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element. The key to this products immense success is its novel tubular architecture. This arrangement provides a means to send the optical path directly through the middle of the motor. The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques. The LFA-10 Linear Foucs Actuator is directly compatible with the SCA814 Servo Controlled Amplifier.

This motor is typically configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element. The key to this products immense success is its novel tubular architecture. This arrangement provides a means to send the optical path directly through the middle of the motor. The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques. The LFA-10 Linear Foucs Actuator is directly compatible with the SCA814 Servo Controlled Amplifier.

By design, the LFA-10 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation. Through manufacturing tolerances only there can be a small amount of pitch and roll motion that is induced during the intended translation. These small but real error sources are routinely characterized during the manufacturing process using our AC400 Digital Autocollimator to control product uniformity.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For Specifications, Drawings, etc. Click Here

Equipment Soultions

For additional information contact Paul Swanson at Equipment Solutions, 461 East Evelyn Ave., Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Both comments and pings are currently closed.

Comments are closed.

Powered by WordPress | Download Free WordPress Themes | Thanks to Themes Gallery, Premium Free WordPress Themes and Free Premium WordPress Themes